Enamel for restructuring sanitary ware

Strong Technical Degreaser – Solvent-Free, Hypoallergenic, Plant-Based Formula

Strong technical degreaser Ideal for Resins and Silicones - it is a liquid degreaser, non-aggressive on the skin: it is dermatologically tested and hypoallergenic. Made only with solvent-free plant extracts. Its formula contains valuable plant extracts! 100% natural – solvent-free! Ingredients: Plant extracts - valerian, aloe vera, mint, rosemary, sage, lavender, calendula, linden, thyme, witch hazel. Extremely delicate. Suitable for use on: STAINLESS STEEL – ALUMINUM OVENS - CAR INTERIORS GRANITE - PANS – REFRIGERATORS CAMPERS - MOTORBIKES – CARPETS CERAMICS - SANITARY WARE – HOODS FABRICS - WORK BENCHES – SHUTTERS AND MUCH MORE ... Solvent-free and alcohol-free, made with raw materials of plant origin. Removes greases, oils, markers, encrustations, adhesive residues, silicone, wax, tar, permanent inks, paints, enamels, resins, pitch, gas oil.

$7,95

"Vertical Glass" - Decorative Epoxy Wall Covering for Vertical and Inclined Surfaces

Coating for inclined or vertical walls and surfaces / This epoxy formulation allows you to coat surfaces and walls with a transparent layer or decorate them with a colored layer, resulting in a glossy, washable and waterproof surface. The Vertical Glass resin differs from normal resins allows creatives to create sharp shapes and designs on surfaces and canvases without the resin mixing unintentionally losing the original design! Transparent, UV-resistant epoxy system that creates a hard, glossy protective layer. Vertical Glass allows you to keep your initial design, faithfully respecting your creative idea! The surface will be perfectly smooth and resistant to moisture. Solvent-free and odorless epoxy resin. Applications: Floors and Walls (pre-existing) also vertical; Protection of material coatings and other artistic decorations; Coating, repair and decoration of shower trays and sanitary ware; Coating of surfaces, objects and furniture to give depth and brilliance to the color, even in Vertical! Features: For a smooth coating, it is applied with a spatula to the surface of any material: tile, concrete, wood, brick, etc. It has good hiding power, and completely covers the work surface in one application Creates a glossy, smooth and moisture-resistant layer To create a matte surface, it is easily sanded (48 hours after application, with a grain size of 1000-2000 P) Protects from moisture and gives a new life to surfaces It can be painted with dyes and pigments from our assortment Does not self-align: saves the drawing that you set for it 🙂 Please note that in the unpainted form, the material is not completely transparent, and there is a slight “milky” shade with almost imperceptible micro-particles, so we recommend painting it It is used for: Floor coverings, walls, furniture and other surfaces Protection of surfaces of materials Painting, repair and decoration of showers and bathrooms Creation of paintings, murals and other works of art  

$109,49

“Art Pro Deluxe” – Ultra-High Viscosity Epoxy Resin for Artists

• "Art Pro Deluxe" non-toxic ultra-high viscosity epoxy resin for artists. The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE. • Beloved by many artists around the world: ✔️ ULTRA HIGH viscosity -> easy control lines in resin and geode- art (coasters, trays, paintings) ✔️ Amazing glossy and self-levelling surface ✔️ High scratch resistance -> ideal for finish layers and use for coasters and trays ✔️ UV filter for protection against yellowing -> 10 years warranty ✔️ Safe and Certified -> Non-toxic, Solvent-free, non-flammable, and totally safe ✔️ High transparency -> a true liquid crystal ✔️ Easy to use -> fast curing time (1st stage - 10-12h; 2nd - 18h) ✔️ Trusted quality -> Thousands customers since 2015 Check and tag our social media for inspiration! We always happy to publish your art-work –Instagram Logo Icon - Download in Gradient Style 🌿Cruelty Free, Vegan Friendly🐹

$41,00

““Epoxytable 5-Five” – Deep Pour Epoxy Resin for Tables and Large Projects, Casting up to 2 Inches

• “EPOXYTABLE 5-FIVE” - deep pour epoxy resin for tables & large projects. Free 25ml pigment* + Gloves + Detailed instruction. • The best choice for deep pouring: ✔️ Low exothermic reaction –> castings up to 5cm [1,96”] ✔️ Strong UV filters –> non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> bubbles free ✔️ Long working time –> no rush in the process ✔️ Heat resistance –> up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 ✔️ Cruelty Free, Vegan Friendly🐹

$41,00

Restructuring Sanitary Ware with Epoxy Enamel

Epoxy enamel for restructuring sanitary ware offers a perfect solution to breathe new life into worn or damaged bathtubs, sinks, or shower trays. This specialized enamel for ceramic or porcelain surfaces ensures a durable and scratch-resistant finish, protecting against daily wear and tear. Prior to application, thorough surface cleaning and sanding of imperfections are essential. Once dried for the required time, the sanitary ware enamel guarantees a uniform and professional outcome, transforming aged fixtures into like-new pieces at a cost-effective price point.

Sanitary Enamel for Ceramic Surfaces

Sanitary enamel is a robust paint designed to coat ceramic surfaces such as sinks, bathtubs, and toilets. This protective coating offers effective resistance against moisture, wear, and chemical agents commonly found in bathroom environments. Engineered to endure frequent cleanings and daily use, sanitary enamel preserves the appearance and durability of ceramic surfaces over time. Its specific formulation ensures even application and a long-lasting finish, making it an ideal choice for those seeking to effectively and durably revamp their sanitary ware.

Repainting Sanitary Fixtures with Resin Coating Kits

To repaint sanitary fixtures, consider using resin coating kits, preferably based on epoxy resin. Follow these steps for optimal results:

• Thoroughly clean the sanitary fixtures to remove dirt and grease.
• Lightly sand the surface to enhance coating adhesion.
• Apply a specific primer for resins to the entire surface.
• Coat the surface with resin using a brush or roller following the manufacturer's instructions.
• Allow adequate drying time and apply additional layers if necessary.
• Once dry, seal the coating with a transparent sealant for enhanced durability.

By adhering to these instructions diligently, you can effectively and durably repaint sanitary fixtures.

Bathroom Tile Paint for a Fresh Look

Bathroom tile paints are tailor-made products that enable you to rejuvenate existing tiles, offering a budget-friendly and speedy solution to update the bathroom's aesthetics. These paints are formulated to withstand moisture and the typical conditions of a bathroom, ensuring strong adhesion and long-lasting durability. Prior to application, thorough tile cleaning and ensuring a mold-free, dry surface are crucial. Following the manufacturer's instructions meticulously is advised to achieve optimal results and attain a uniform, resilient finish.

Tutorial: Applying Sanitary Enamel

For a successful application of enamel to sanitary ware, follow these steps:

• 1. Cleaning: Ensure the surface is clean and dry.
• 2. Preparation: Lightly sand the surface to enhance enamel adhesion.
• 3. Application: Apply the enamel in thin, even layers, allowing drying time between coats.
• 4. Drying: Let it dry for the specified time indicated on the packaging.
• 5. Finishing: Apply a coat of polish, if needed, for a glossy finish.
• 6. Maintenance: Avoid harsh detergents and clean with gentle products to uphold the finish.

By following these steps meticulously, you will achieve a professional and enduring result over time.

“Colorfun” – Liquid Epoxy Resin Colouring Paste Set, Translucent Effect, 10 x 25ml

Intense and brilliant color, ideal for Transparent Epoxy Resins. Mix small quantities to get a translucent effect. The high coverage of the “Colorful Original” range allows to obtain a full and bright color. The high concentration provides an opaque color with a few drops. Usable to color the products of the RESIN PRO range. 💥 Ideal for epoxy creations and resin tables thanks to its features: ✔️ Intense colors ✔️ Easy to mix ✔️ Intense colors ✔️ High concentration ✔️ Easy to get a translucent effect ✔️ 5 stars on Trustpilot 🌿Cruelty Free, Vegan Friendly🐹

$16,00

“I–GUM” – Non-Toxic Silicone Putty for mould making

• "I-GUM" - Non-Toxic Silicone Rubber - Paste Form Pasty silicone rubber "I-GUM" is a two–component product for creating moulds and forms for pouring with epoxy resin. • Superior formula proven by years of experience: ✔️ Easy to use -> 1:1 mix ratio ✔️ Non-toxic -> You can work without gloves ✔️ Without smell ✔️ Long working time -> 20 minutes ✔️ European quality -> Directly from Italy ✔️ Ideal for creating moulds and frames for working with resin, polyurethanes, wax, cement and other materials ✔️ 🌿Cruelty Free, Vegan Friendly🐹

$22,00

“Pure Mold” – Translucent Liquid Silicone Rubber for Mould Making, 1:1 Mix Ratio

Images On sale “Pure Mold” – Translucent Liquid Silicone Rubber for Mould Making, 1:1 Mix Ratio Available, ready for shipping Order now to receive your product between Wednesday, April 29 and Wednesday, May 6. Shipping $16 Choose your kit: Quantity "Pure Mold" - Translucent Liquid Silicone Rubber for Mould Making, 1:1 Mix Ratio quantity The kit: 1 KG (500 GR of A + 500 GR of B) $52,95 Original price was: $52,95.$44,95Current price is: $44,95.-15% 💰 You save $8.00 TRANSLUCENT AND FAST CASTING LIQUID SILICONE RUBBER FOR MOULDS 🧪【INNOVATIVE FORMULA】Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use. 💎【IMPECCABLE QUALITY】Guarantees the creation of resistant and detailed moulds that will last over time and will be reusable several times! 🌿【SAFE AND CERTIFIED】 100% Made in Italy, guaranteed by a Certificate of Non-toxicity and solvent-free and odorless, this rubber is configured as a safe and easy to use product! ⚙️【EASY TO USE】 Mixing ratio 1: 1; Hardness: 13 Shore; Catalysis in about 6-8 hours. The poly additive formula makes it more resistant than other silicones, allowing the creation of higher quality molds. + Easy mixing ratio 1:1 + Less mould shrinkage over time + 30% longer service life + Fast (6-8H) + Translucent + Resistant Good for: epoxy resins, polyester, polyurethanes and acrylics, cements and plasters.+ Liquid 🌿Cruelty Free, Vegan Friendly🐹

$44,00

“Epoxy Polish” – Resin Polishing Kit with Cream and Abralon Sanding Pads

Great way to add some glossy finish to your epoxy project! Was made especially for resin world. Resin Pro offers the possibility to achieve a perfect polishing by using different types of abrasive pastes. It can be used by hand or with an orbital polisher to make your resin creations shiny.

$36,00