Sale!

“PURE MOULD” – Translucent Liquid Silicone Rubber – For Your Own Moulds

$16.84$162.64Earn up to 163 points.

-25%
Calculator

TRANSLUCENT AND FAST CASTING LIQUID SILICONE RUBBER FOR MOULDS 

🧪【INNOVATIVE FORMULA】Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

💎【IMPECCABLE QUALITY】Guarantees the creation of resistant and detailed moulds that will last over time and will be reusable several times!

🌿【SAFE AND CERTIFIED】 100% Made in Italy, guaranteed by a Certificate of Non-toxicity and solvent-free and odorless, this rubber is configured as a safe and easy to use product!

⚙️【EASY TO USE】 Mixing ratio 1: 1; Hardness: 13 Shore; Catalysis in about 6-8 hours. The poly additive formula makes it more resistant than other silicones, allowing the creation of higher quality molds.

   + Easy mixing ratio 1:1
   + Less mould shrinkage over time
   + 30% longer service life
   + Fast (6-8H)
   + Translucent
   + Resistant

Good for:

  • epoxy resins,
  • polyester,
  • polyurethanes and acrylics,
  • cements and plasters.+ Liquid
  • 🌿Cruelty Free, Vegan Friendly🐹

“PURE MOLD”: TRANSLUCENT AND FAST LIQUID SILICONE RUBBER FOR THE CREATION OF MOULDS COMPATIBLE WITH RESIN.

500 GR [1,10 LB] – A + B (250 GR + 250 GR) [0,55 LB + 0,55 LB]
or
1000 GR [2,20 LB] – A + B (500 GR + 500 GR) [1,10 LB + 1,10 LB]

Very easy to use silicone for creating detailed moulds of any size!

Description. Liquid medium-hard condensation pourable silicone rubber (13 shore A). PURE MOLD is a two-component addition silicone rubber that vulcanizes at room temperature.
Due to its remarkable fluidity, it is ideal even for the duplication of models with undercut areas.

The main qualities of the product make it particularly suitable for the use of:

  • epoxy resins,
  • polyester,
  • polyurethanes and acrylics,
  • cements and plasters.
  • + Liquid
  • + Fast (6-8H)
  • + Translucent
  • + Resistant.

It possesses high mechanical characteristics, and it is suited for the preparation of casts with considerable undercuts: reproduction of bronze statues (artistic foundries), serial reproduction of complex objects in resin (polyester, polyurethane and epoxy), in plaster, natural and synthetic wax, concrete (e.g. statues, decorative garden items, decorative candles, prototypes, decorative ceramics, rosettes, frames, faux wood decorations, etc.). Casts for technical products.

AREAS OF APPLICATION
Thanks to its considerable accuracy in reproduction, its high dimensional stability and its mechanical resistance, PURE MOLD silicone rubber is especially good for model and mould making. Its great fluidity and its high dimensional stability make it ideal for decorative pottery, ceramic and jewellery serigraphy and concrete moulding. Silicone rubber is compatible with the majority of Epoxy, Polyurethane and Acrylic resins, and with plaster and cement.
Demould time: 4H

Technical Features:

* Colour Part A: Translucent

* Colour Part B: Translucent

* Mix ratio 1: 1

* Pre-catalyst mixing viscosity 4500 +/- 500 cP

* Mixing time at 23°C (73°F) 1 ‘

* Working time at 23°C (73°F) 40 ‘- 50’

* Demould time at 23°C (73°F) 180 ’

* Shore A hardness after 24 hours 13 +/- 2 ShA

* Ultimate tensile strength 3.0 +/- 0.2 N/mm²

* Elongation at break 450 +/- 20%

* Tear resistance (Die B) 14 +/- N/mm.

* Tear resistance (Die C) 9 +/- N/1mm

Note: Do not use above 30°C [86 F]. For more safety information, please carefully read the Safety Data Sheet of all ingredients.

WARNINGS:
During processing, use protective masks, gloves, and other protective clothing.
In case of contact with eyes, immediately rinse with cold water for 15 minutes and immediately consult a doctor.

Download Non toxicity Certificate

Trustpilot

suggested products for you