Driveable coating for garages

"Resinstone" - Methacrylic Resin for Stamped Concrete Floors & Driveways, 5kg

ONE-COMPONENT METHACRYLIC RESIN “RESINSTONE” for stamped floors 5 KG [176,37 Oz] ONE-COMPONENT METHACRYLIC RESIN for stamped floors CONSOLIDANT, WATERPROOF, DUSTPROOF AND ANTI-CARBONATION METHACRYLIC COATING FOR CONCRETE FLOORS. “RESINSTONE” is a low-viscosity, one-component, liquid formula that penetrates deeply for capillary absorption in concrete floors and surfaces, providing moisture protection and increasing both mechanical resistance and protection against chemical agents. “RESINSTONE” is formulated with enhanced methacrylic polymers in order to guarantee: Ø Consolidation and protection of concrete surfaces Ø Moisture protection Ø Protection against oils, acids and other chemical agents (perfect also for industrial environments) Ø Revitalization of the colour tone Concrete surfaces treated with “RESINSTONE” do not absorb water, creating polished, clean, dust-proof but still breathable surfaces. Resistant to yellowing, washing, bad weather (even acid rain). MAIN APPLICATIONS ✓ Consolidation and protection for concrete surfaces. ✓ Great to protect indoor spaces such as cellars, warehouses, garages, etc. ✓ Thanks to its excellent anti-UV rays features, it is ideal for outdoor areas such as yards, parking lots, paths, courtyards, etc. ✓ “RESINSTONE” can be applied 8 hours after the execution of the concrete artifact (following preventive test) ADVANTAGES ✓ Easy to apply (one-component, ready to use, just pour it over the concrete and wait a few hours until it is dry) ✓ Its low viscosity allows it to deeply penetrate and strengthen ✓ Fast: ready in less than 12 hours! ✓ Waterproof and water vapor permeable (thus allowing surfaces to breathe with no moisture penetration!) ✓ Good chemical resistance to oils, grease and acids. ✓ Range of applications from +5°C [41 F] to +35°C [95 F]. ✓ Resistant to temperature changes from -30°C [86 F] to +80°C [176 F]. ✓ Excellent mechanical properties make it a lasting product over the years and with high scratch-resistance if you have not enough experience, we insistly suggest to make a small test before working with large project. WARNINGS: During processing, use protective masks, gloves, and other protective clothing. In case of contact with eyes, immediately rinse with cold water for 15 minutes and immediately consult a doctor.

$42,95

“Art Pro Deluxe” – Ultra-High Viscosity Epoxy Resin for Artists

• "Art Pro Deluxe" non-toxic ultra-high viscosity epoxy resin for artists. The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE. • Beloved by many artists around the world: ✔️ ULTRA HIGH viscosity -> easy control lines in resin and geode- art (coasters, trays, paintings) ✔️ Amazing glossy and self-levelling surface ✔️ High scratch resistance -> ideal for finish layers and use for coasters and trays ✔️ UV filter for protection against yellowing -> 10 years warranty ✔️ Safe and Certified -> Non-toxic, Solvent-free, non-flammable, and totally safe ✔️ High transparency -> a true liquid crystal ✔️ Easy to use -> fast curing time (1st stage - 10-12h; 2nd - 18h) ✔️ Trusted quality -> Thousands customers since 2015 Check and tag our social media for inspiration! We always happy to publish your art-work –Instagram Logo Icon - Download in Gradient Style 🌿Cruelty Free, Vegan Friendly🐹

$41,00

““Epoxytable 5-Five” – Deep Pour Epoxy Resin for Tables and Large Projects, Casting up to 2 Inches

• “EPOXYTABLE 5-FIVE” - deep pour epoxy resin for tables & large projects. Free 25ml pigment* + Gloves + Detailed instruction. • The best choice for deep pouring: ✔️ Low exothermic reaction –> castings up to 5cm [1,96”] ✔️ Strong UV filters –> non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> bubbles free ✔️ Long working time –> no rush in the process ✔️ Heat resistance –> up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 ✔️ Cruelty Free, Vegan Friendly🐹

$41,00

“Icrystal” – Clear Epoxy Resin, Two-Part, Water Clear Casting & Coating

iCrystal Epoxy Resin At A Glance Description: Water clear, two-part, multipurpose epoxy resin Uses: Casting resin for table tops, jewelry, or as a coating for artworks Thickness: Maximum of 5/8'' (1.5cm) per layer in tabletop applications Viscosity: Low viscosity, quick sheds bubbles Working Time: 15-30 minutes, depending upon mixture volume Initial Cure Time: 1-4 Hours, depending upon volume and room temperature Compatibility: Alcohol-based colorants, inert powders, dried organic materials Mix Ratio: 2 parts A to 1 part B, by weight (Not volume) Characteristics: Non-Yellowing, scratch resistant, Vegan-friendly

$10,12

Durable Coating for Garage Floors

A durable coating for garage floors is a long-lasting solution designed to withstand vehicle traffic. Made with epoxy or polyurethane resins, this coating provides exceptional protection and a visually appealing finish. Ideal for both residential and commercial garages, it offers a non-slip, waterproof, and easy-to-clean surface. Proper surface preparation is essential before applying this coating ? ensuring a clean, smooth, and crack-free foundation. By creating a protective barrier against stains, wear, and weathering, this coating helps maintain the floor in optimal condition over time.

Epoxy Resin for Drivable Garages

Epoxy resin for drivable garages offers a durable and resistant coating for garage floors. This type of resin delivers a smooth, waterproof, and easy-to-clean surface that can withstand vehicular traffic and oil stains. Prior to application, thorough surface preparation is crucial, including the removal of dirt, grease, and old coatings. Precision and attention to detail are key during the application process to achieve a uniform and long-lasting finish. Following the manufacturer's instructions and considering a scratch-resistant topcoat can enhance the durability of the epoxy resin over time.

How to Apply Epoxy Resin on Garage Floors

Follow these steps to successfully apply epoxy resin on your garage floor

• 1. Preparation: Ensure the floor is clean, smooth, and free of cracks or imperfections. Remove any oil or grease.
• 2. Repairs: Address any cracks or holes with a suitable product if needed.
• 3. Primer: Apply a specific primer for epoxy resin to promote excellent adhesion.
• 4. Mixing: Follow the manufacturer's instructions carefully to prepare the epoxy resin correctly.
• 5. Application: Use a roller to evenly spread the resin on the floor, avoiding buildup and air bubbles.
• 6. Finishing: Apply a protective topcoat for enhanced durability and wear resistance.
• 7. Drying: Allow the floor to dry completely following the recommended drying times.

Epoxy Resin Application on Drivable Surfaces Tutorial

Applying epoxy resin on drivable surfaces is a precise process that demands attention to detail. Ensure the surface is clean, dry, and free from dust or grease before starting. Follow the manufacturer's instructions diligently to prepare the epoxy resin correctly. Use a roller to apply the resin evenly, preventing buildup and air bubbles. Allow the resin to dry completely according to the recommended times. Protect the surface from weather conditions and vehicular traffic to ensure the longevity of the epoxy resin coating.

Epoxy Resin Garage Floor Maintenance

Proper maintenance is crucial to preserve the durability and appearance of an epoxy resin garage floor. Here are some tips to keep your floor in top condition:

Regular cleaning with neutral detergents to prevent dirt and corrosive substances buildup.

Periodic checks to identify scratches or dents for prompt repairs.

Application of a protective sealing layer to maintain the shine and resistance of the resin.

Avoid using harsh chemicals that could damage the coating.

Following these guidelines will help you maintain your epoxy resin floor in excellent condition.

“Colorfun” – Liquid Epoxy Resin Colouring Paste Set, Translucent Effect, 10 x 25ml

Intense and brilliant color, ideal for Transparent Epoxy Resins. Mix small quantities to get a translucent effect. The high coverage of the “Colorful Original” range allows to obtain a full and bright color. The high concentration provides an opaque color with a few drops. Usable to color the products of the RESIN PRO range. 💥 Ideal for epoxy creations and resin tables thanks to its features: ✔️ Intense colors ✔️ Easy to mix ✔️ Intense colors ✔️ High concentration ✔️ Easy to get a translucent effect ✔️ 5 stars on Trustpilot 🌿Cruelty Free, Vegan Friendly🐹

$16,00

“I–GUM” – Non-Toxic Silicone Putty for mould making

• "I-GUM" - Non-Toxic Silicone Rubber - Paste Form Pasty silicone rubber "I-GUM" is a two–component product for creating moulds and forms for pouring with epoxy resin. • Superior formula proven by years of experience: ✔️ Easy to use -> 1:1 mix ratio ✔️ Non-toxic -> You can work without gloves ✔️ Without smell ✔️ Long working time -> 20 minutes ✔️ European quality -> Directly from Italy ✔️ Ideal for creating moulds and frames for working with resin, polyurethanes, wax, cement and other materials ✔️ 🌿Cruelty Free, Vegan Friendly🐹

$22,00

“Pure Mold” – Translucent Liquid Silicone Rubber for Mould Making, 1:1 Mix Ratio

Images On sale “Pure Mold” – Translucent Liquid Silicone Rubber for Mould Making, 1:1 Mix Ratio Available, ready for shipping Order now to receive your product between Wednesday, April 29 and Wednesday, May 6. Shipping $16 Choose your kit: Quantity "Pure Mold" - Translucent Liquid Silicone Rubber for Mould Making, 1:1 Mix Ratio quantity The kit: 1 KG (500 GR of A + 500 GR of B) $52,95 Original price was: $52,95.$44,95Current price is: $44,95.-15% 💰 You save $8.00 TRANSLUCENT AND FAST CASTING LIQUID SILICONE RUBBER FOR MOULDS 🧪【INNOVATIVE FORMULA】Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use. 💎【IMPECCABLE QUALITY】Guarantees the creation of resistant and detailed moulds that will last over time and will be reusable several times! 🌿【SAFE AND CERTIFIED】 100% Made in Italy, guaranteed by a Certificate of Non-toxicity and solvent-free and odorless, this rubber is configured as a safe and easy to use product! ⚙️【EASY TO USE】 Mixing ratio 1: 1; Hardness: 13 Shore; Catalysis in about 6-8 hours. The poly additive formula makes it more resistant than other silicones, allowing the creation of higher quality molds. + Easy mixing ratio 1:1 + Less mould shrinkage over time + 30% longer service life + Fast (6-8H) + Translucent + Resistant Good for: epoxy resins, polyester, polyurethanes and acrylics, cements and plasters.+ Liquid 🌿Cruelty Free, Vegan Friendly🐹

$44,00

“Epoxy Polish” – Resin Polishing Kit with Cream and Abralon Sanding Pads

Great way to add some glossy finish to your epoxy project! Was made especially for resin world. Resin Pro offers the possibility to achieve a perfect polishing by using different types of abrasive pastes. It can be used by hand or with an orbital polisher to make your resin creations shiny.

$36,00