Removing logistic labels from packages

Protective Polyethylene Sheet Film 4x4m for Epoxy Resin Worktops & Floors

The 4X4 sheet is most commonly used to protect worktops and floors when working with Epoxy Resin! These very light but resistant sheets can be applied both on work tables (where artistic castings are made) and on floors when casting large size and in addition can be reused!

$4,07

"Klover-19" - Sanitizing Detergent – Chlorine Based, 5kg

Sanitising detergent based on 2.2% active chlorine for the cleaning of offices, commercial activities, and public bodies. IT BLOCKS THE BIOLOGICAL ACTIVITY OF GERMS AND BACTERIA. Chloroactive alkaline detergent indicated for cleaning and decontamination from germs and bacteria of all surfaces. Consumption. 5 – 10% in water. Neutralises organic and inorganic deposits. Eliminates bad odours and releases a pleasant fragrance. Washing and sanitising of washable surfaces in general, floors, tiles, walls, fixtures, furnishings, and sanitary equipment in stainless steel or plastic. Suitable for cleaning toilets and showers. Type. Chloroactive alkaline detergent indicated for cleaning and decontamination of all washable surfaces and equipment Ownership. It is used in the food industry, in the community in general, in catering and in healthcare companies. The combined action of surfactants and active chlorine guarantee effectiveness and excellent results in all conditions of use. Intended use. Washing and sanitising of washable surfaces in general, floors, tiles, walls, fixtures, furnishings, and sanitary equipment in stainless steel or plastic. Suitable for cleaning toilets and showers. Colour. Clear straw yellow liquid Consumption. 5 – 10% in water Foam. low / moderate Lemon smell VOC virtually exempt Method of use: 5 to 10% in hot or cold water according to the degree of soiling. Distribute the product evenly and wait at least 10 minutes (National Environment agency Guide) Proceed with cleaning operations and rinse with clean water. The product contains 22,000 ppm of Chlorine; at a concentration of 5% we will obtain a 0.1% solution of Chlorine (1,100 ppm). Manufacturers can change the composition of their products. Therefore, the packaging of the product may contain different information than that shown on our site. Please always read the label, warnings and instructions provided on the product before using or consuming it.

$22,49

“Art Pro Deluxe” – Ultra-High Viscosity Epoxy Resin for Artists

• "Art Pro Deluxe" non-toxic ultra-high viscosity epoxy resin for artists. The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE. • Beloved by many artists around the world: ✔️ ULTRA HIGH viscosity -> easy control lines in resin and geode- art (coasters, trays, paintings) ✔️ Amazing glossy and self-levelling surface ✔️ High scratch resistance -> ideal for finish layers and use for coasters and trays ✔️ UV filter for protection against yellowing -> 10 years warranty ✔️ Safe and Certified -> Non-toxic, Solvent-free, non-flammable, and totally safe ✔️ High transparency -> a true liquid crystal ✔️ Easy to use -> fast curing time (1st stage - 10-12h; 2nd - 18h) ✔️ Trusted quality -> Thousands customers since 2015 Check and tag our social media for inspiration! We always happy to publish your art-work –Instagram Logo Icon - Download in Gradient Style 🌿Cruelty Free, Vegan Friendly🐹

$41,00

““Epoxytable 5-Five” – Deep Pour Epoxy Resin for Tables and Large Projects, Casting up to 2 Inches

• “EPOXYTABLE 5-FIVE” - deep pour epoxy resin for tables & large projects. Free 25ml pigment* + Gloves + Detailed instruction. • The best choice for deep pouring: ✔️ Low exothermic reaction –> castings up to 5cm [1,96”] ✔️ Strong UV filters –> non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> bubbles free ✔️ Long working time –> no rush in the process ✔️ Heat resistance –> up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 ✔️ Cruelty Free, Vegan Friendly🐹

$41,00

To effectively remove shipping labels from packages, follow these simple steps

• Soak the label with hot water or use a hairdryer to soften the adhesive.
• Gently lift a corner of the label with your nails or a plastic spatula.
• Slowly peel off the label with gentle movements, taking care not to tear it.
• If there are glue residues left on the packaging, you can use a mild detergent or isopropyl alcohol to remove them.

By following these instructions, you can remove shipping labels without damaging the packages.

Removing Adhesive Labels from Packages

To remove adhesive labels from packages, follow these steps

• Fill a container with warm water and add some detergent.
• Immerse the package in the warm water for a few minutes to soften the adhesive.
• Use a spatula or sandpaper to gently remove the label.
• If necessary, apply some olive or coconut oil to the remaining adhesive to dissolve it.
• Clean the surface with a mild detergent to remove any residue.

By following these steps, it will be easier to remove adhesive labels from packages without damaging the underlying surface.

How to Remove Package Stickers

To effectively remove stickers from packages, follow these steps:

Dampen the sticker with hot water or a mild detergent.

Use a scraper or a spatula to gently peel off the sticker.

If the sticker is stubborn, you can try heating it with a hairdryer to make it easier to remove.

Alternatively, specific solvents such as isopropyl alcohol or acetone can be used to dissolve the adhesive.

After removing the sticker, clean the surface with a detergent to eliminate any residue.

By following these tips, you will be able to remove stickers from packages without damaging the underlying surfaces.

Removing Adhesive Labels from Packages

To remove adhesive labels from packages, follow these steps:

Dampen a cloth with hot water and place it over the label for a few minutes to loosen the adhesive.

Once the adhesive is softened, use a spatula or a rigid card to gently peel the label off the package.

If there is any residual adhesive left, apply some olive or coconut oil to the area and let it sit for a few minutes to further dissolve the adhesive.

After removing the label and adhesive, clean the area with a mild detergent to eliminate any remaining residue.

By following these simple steps, you should be able to easily remove adhesive labels from packages without damaging the underlying surface.

Removing Shipping Label Residues

To remove shipping label residues, use a gentle solvent such as isopropyl alcohol or acetone. Dampen a soft cloth with the chosen solvent and gently dab the area where the label residues are present. Allow it to sit for a few minutes to soften the adhesive, then rub gently until the labels are completely removed. Alternatively, specific adhesive removal products can be used. It is important to test the solvent or product on a small hidden area of the material to ensure it does not damage the surface. Once the label residues have been removed, thoroughly clean the area with water and soap to eliminate any solvent residues.

“Colorfun” – Liquid Epoxy Resin Colouring Paste Set, Translucent Effect, 10 x 25ml

Intense and brilliant color, ideal for Transparent Epoxy Resins. Mix small quantities to get a translucent effect. The high coverage of the “Colorful Original” range allows to obtain a full and bright color. The high concentration provides an opaque color with a few drops. Usable to color the products of the RESIN PRO range. 💥 Ideal for epoxy creations and resin tables thanks to its features: ✔️ Intense colors ✔️ Easy to mix ✔️ Intense colors ✔️ High concentration ✔️ Easy to get a translucent effect ✔️ 5 stars on Trustpilot 🌿Cruelty Free, Vegan Friendly🐹

$16,00

“I–GUM” – Non-Toxic Silicone Putty for mould making

• "I-GUM" - Non-Toxic Silicone Rubber - Paste Form Pasty silicone rubber "I-GUM" is a two–component product for creating moulds and forms for pouring with epoxy resin. • Superior formula proven by years of experience: ✔️ Easy to use -> 1:1 mix ratio ✔️ Non-toxic -> You can work without gloves ✔️ Without smell ✔️ Long working time -> 20 minutes ✔️ European quality -> Directly from Italy ✔️ Ideal for creating moulds and frames for working with resin, polyurethanes, wax, cement and other materials ✔️ 🌿Cruelty Free, Vegan Friendly🐹

$22,00

“Pure Mold” – Translucent Liquid Silicone Rubber for Mould Making, 1:1 Mix Ratio

Images On sale “Pure Mold” – Translucent Liquid Silicone Rubber for Mould Making, 1:1 Mix Ratio Available, ready for shipping Order now to receive your product between Wednesday, April 29 and Wednesday, May 6. Shipping $16 Choose your kit: Quantity "Pure Mold" - Translucent Liquid Silicone Rubber for Mould Making, 1:1 Mix Ratio quantity The kit: 1 KG (500 GR of A + 500 GR of B) $52,95 Original price was: $52,95.$44,95Current price is: $44,95.-15% 💰 You save $8.00 TRANSLUCENT AND FAST CASTING LIQUID SILICONE RUBBER FOR MOULDS 🧪【INNOVATIVE FORMULA】Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use. 💎【IMPECCABLE QUALITY】Guarantees the creation of resistant and detailed moulds that will last over time and will be reusable several times! 🌿【SAFE AND CERTIFIED】 100% Made in Italy, guaranteed by a Certificate of Non-toxicity and solvent-free and odorless, this rubber is configured as a safe and easy to use product! ⚙️【EASY TO USE】 Mixing ratio 1: 1; Hardness: 13 Shore; Catalysis in about 6-8 hours. The poly additive formula makes it more resistant than other silicones, allowing the creation of higher quality molds. + Easy mixing ratio 1:1 + Less mould shrinkage over time + 30% longer service life + Fast (6-8H) + Translucent + Resistant Good for: epoxy resins, polyester, polyurethanes and acrylics, cements and plasters.+ Liquid 🌿Cruelty Free, Vegan Friendly🐹

$44,00

“Epoxy Polish” – Resin Polishing Kit with Cream and Abralon Sanding Pads

Great way to add some glossy finish to your epoxy project! Was made especially for resin world. Resin Pro offers the possibility to achieve a perfect polishing by using different types of abrasive pastes. It can be used by hand or with an orbital polisher to make your resin creations shiny.

$36,00