Reduce defects on flat pours

Silicone Triangle Tray Mould for Coasters, 12.6 x 8.6 x 0.4 in

HIGH-QUALITY SILICONE MOULD FOR HANDCRAFTS This flat Coaster Mould has a smooth interior and produces a beautiful coaster with a professional finish. Use our heat-resistant resin to make something that is not only functional. Dimensions:12.6 x 8.6 x 0.4 in If you're using these moulds to make coasters, we recommend that you add a 3mm thick clear layer of Heat-Resistant resin first in your mould. Let it set and then add more resin with colour, ink, glitter, flowers etc. Once turned out (after 3-4 days), what was the bottom will be the top and heat-resistant up to 20oC! Remember that our Heat-Resistant resin needs between 72 h to achieve full cure, so don't place a hot cup on it too early. DO-IT-YOURSELF. Material: Silicone, Colour: Semi-transparent; Reusable, Non-stick, Easy to use and clean. Warning: do not use aggressive solvents, High-quality moulds, heat-resistant: -40°C to + 210°C [-104° F to +410° F] Attention! Remove the product from the mold no later than 12 hours after pouring the resin. Otherwise, there is a chance of local adhesion of the resin to the mold.  

$10,23

"Bottle Holder" - Silicone Mould 4.7×9.8in (120x252mm)

HIGH-QUALITY SILICONE MOULD FOR HANDCRAFTS This flat Mould has a smooth interior and produces a beautiful art-work with a professional finish. Use our heat-resistant resin to make something that is not only functional. Dimensions: 120 x 252 mm   If you're using these moulds to make coasters, we recommend that you add a 3mm thick clear layer of Heat-Resistant resin first in your mould. Let it set and then add more resin with colour, ink, glitter, flowers etc. Once turned out (after 3-4 days), what was the bottom will be the top and heat-resistant up to 200C! Remember that our Heat-Resistant resin needs up to 72 hours to achieve full cure, so don't place a hot cup on it too early. DO-IT-YOURSELF. Material: Silicone, Colour: Semi-transparent; Reusable, Non-stick, Easy to use and clean.   Warning: do not use aggressive solvents, High-quality moulds, heat-resistant: -40°C to + 210°C [-104° F to +410° F] Attention! Remove the product from the mold no later than 12 hours after pouring the resin. Otherwise, there is a chance of local adhesion of the resin to the mold.

$6,95

"Tweezer Set" – 7 Piece Stainless Steel Precision Tool Kit

Carbon steel. Ideal for model building, clock repairs and other delicate work. Includes straight point, straight jaw, straight jaw with cushioned grip, angled jaw, angled jaw with cushioned grip, duck bill and bent cross with cushioned grip. Carbon steel Ideal for model building, clock repairs & other delicate work Includes straight point, straight jaw, straight jaw with cushioned grip, angled jaw, angled jaw with cushioned grip, bent cross with cushioned jaw & duck bill Features: Variety of Tips: The set includes pointed, slanted, and flat-tipped tweezers, among others, catering to different needs such as placing small objects, handling delicate components, and applying intricate details. Durable Construction: Made from high-quality stainless steel, these tweezers are built to last. They are resistant to corrosion and staining, ensuring long-term reliability even when working with sticky or resin-coated materials. Precision Handling: The fine tips and ergonomic design provide excellent control and accuracy, making it easy to manipulate tiny elements or achieve precise placements within your epoxy resin projects. Comfortable Grip: Each tweezer is designed with a comfortable handle that reduces hand strain during extended use, allowing for steady and precise movements. Versatile Use: Ideal for a range of tasks, including embedding decorations, positioning small items, or fine-tuning details, this set is perfect for both professional and hobbyist resin crafters. With this Tweezer Set, you'll be equipped to handle all aspects of your epoxy resin work with confidence, achieving professional-quality results and enhancing your overall crafting experience.

$9,95

"Ocean Art" Pigment Kit – Sea Wave Effect for Resin Art

Create your personalized Sea Wave Effect!  The ideal kit for creating cup coasters, geodes, “Ocean Art” style paintings and artistic coatings of all kinds, creating a natural sea wave effect. The “Ocean Art” KIT includes colours, pigments, additives and a non-toxic powder that reacts with wet epoxy resins by repelling itself away, thereby stimulating movement in concentric outward circles and waves. Creates cells and waves in resin art Safe & user-friendly Odourless Non-toxic & non-flammable Zero-VOC formula with no harsh chemical ingredients, solvents or alcohol-based ink Ideal for Ocean Resin Art The “Ocean Art” KIT includes: "Colorfun Deluxe" white colouring paste 30 ml "Colorfun Deluxe" Blue colouring paste 30 ml "Colorfun Deluxe" True Green colouring paste (Gradient green) 30 ml "Pebeo" Turquoise Semitransparent liquid pigment 45 ml "Magic Drops Small" liquid additive 15 ml How to use: Prepare about 300 gr [0,66 lb] of resin and, after mixing it well, divide it into 7 parts. Colour each part with the different pigments included in the kit (blue, opal green, white, turquoise, rich gold). Then use the “Pebeo” Turquoise pigment with two small glasses, and proceed as follows: pour a drop in the first glass and 2/3 in the second. In this way you will be able to perfectly recreate the sea-depth effect, giving an increasingly darker shade depending on the distance from the point where you will paint the coast. Then pour the darker resin in the farthest point from the "shore" (which you can create with a piece of wood or with sand) approaching the "coast" with increasingly transparent resin. In this way you will get a more gradual colouring that will give your creation the depth effect. Now apply the sand or wood, securing them with a layer of transparent resin. With the white pigment, draw thin lines in the shape of a wave which you will then “inflate” using a hairdryer or a straw. Then apply the golden pigment on the "sand" to give a final touch and shine. At this point, touch up your resin with “Magic Drops SMALL” by mixing it with the white pigment and applying it on the resin surface by pouring or dripping. Remove any residues or greasiness with alcohol or acetone, once the resin has catalysed. To get the best effect, we recommend to use “Art Pro” or “Art Pro Deluxe” epoxy resin (high viscosity).   https://youtu.be/ZbgKRgRfjaI

$19,95

Reducing Defects in Epoxy Pours

To minimize defects in epoxy flat pours, it is crucial to adhere to certain best practices.

• Use premium quality resins to ensure enhanced stability and resistance.
• Ensure the working surface is spotless, free of dust, or dirt that may jeopardize resin adhesion.
• Apply a thin, uniform resin layer to prevent air bubbles or excess material buildup.
• Employ top-notch silicone to establish a contamination-free workspace.
• Monitor temperature and humidity levels during the pouring process to guarantee proper resin catalysis and drying.

By following these guidelines, you can significantly diminish defects in flat epoxy pours.

Reducing Air Bubbles in Epoxy Resin

To minimize air bubbles in epoxy resin, it is essential to follow proper practices during the processing. Here are some helpful tips:

• Thoroughly mix the resin and hardener, ensuring no air is incorporated into the mixture.
• Utilize a vacuum chamber to eliminate air bubbles before pouring the resin into the mold.
• Pour the resin gradually and carefully into the mold to prevent bubble formation.
• Use a gas torch or hot brush to eradicate surface air bubbles.
• Avoid excessive stirring of the resin during the curing process.

By diligently following these guidelines, you can achieve optimal results and reduce the presence of air bubbles in the resin.

Techniques to Prevent Imperfections in Resin Casts

To prevent imperfections in resin casts, it is crucial to follow specific techniques

Ensure the support is clean and free from grease residues or other substances that could hinder resin adhesion.

Use high-quality resins suitable for the intended work.

Measure resin and hardener quantities precisely to avoid imbalances leading to defects.

Thoroughly mix components for a uniform distribution.

Prevent air bubbles during mixing and pouring, potentially by using a vacuum chamber.

Monitor the working environment's temperature and humidity to prevent undesired reactions or resin shrinkage.

Utilize properly treated molds to facilitate cast detachment without damage.

Improving Epoxy Resin Surface Finish

To enhance the surface finish of epoxy resin, follow these fundamental steps:

Sand the surface meticulously with fine sandpaper to eliminate imperfections and achieve smoothness.

Clean the surface thoroughly to eliminate dust and residues that could compromise subsequent coatings' adhesion.

Apply a thin layer of specific primer for resins to enhance adhesion of subsequent finishing layers.

Use transparent or colored coatings based on resin or silicone for a glossy, protective finish.

Always adhere to the manufacturer's instructions for optimal and durable results.

"Paraffin Wax" – For Craft Candles, 17.6oz

Bring home the light of craftsmanship with Pure Glow Enter Candle Pro's bright world of homemade candles with Pure Glow, our PARAFFIN WAX for candles, part of the Candle Pro range. Ideal for both beginners and experienced craftsmen, our candle-specific paraffin gives you a perfect result. How to Use It: Heat it to 59c in a saucepan to melt it (thanks to its granule shape it melts much faster) and add the Color Candle Dye and the "Aromas" fragrances at will. Pour into the mould in which you will have placed one of our Lite Line wicks. Superior quality: Candle Pro is a brand 100% made in Italy. Versatility: Perfect for pillar candles, candles, but also suitable to use in a glass surround. Thanks to its resistance, it is self-supporting and ideal for decorated candles. Low fumes: specific for the creation of candles, this candle burning reduces the emission of smoke to a minimum! Discover all the accessories: Pure Glow fits perfectly with our candle moulds, wicks and Color Candle pigments. Perfect for scented candles: Pure Glow can be personalised depending on your taste and preferences. Don't waste time! Join our community of homemade candle lovers and experienced craftsmen who rely on Pure Glow. Add Pure Glow to your cart today and start creating your own magic with candles!

$15,99

“Colorfun” – Liquid Epoxy Resin Colouring Paste Set, Translucent Effect, 10 x 25ml

Intense and brilliant color, ideal for Transparent Epoxy Resins. Mix small quantities to get a translucent effect. The high coverage of the “Colorful Original” range allows to obtain a full and bright color. The high concentration provides an opaque color with a few drops. Usable to color the products of the RESIN PRO range. 💥 Ideal for epoxy creations and resin tables thanks to its features: ✔️ Intense colors ✔️ Easy to mix ✔️ Intense colors ✔️ High concentration ✔️ Easy to get a translucent effect ✔️ 5 stars on Trustpilot 🌿Cruelty Free, Vegan Friendly🐹

$16,00

“I–GUM” – Non-Toxic Silicone Putty for mould making

• "I-GUM" - Non-Toxic Silicone Rubber - Paste Form Pasty silicone rubber "I-GUM" is a two–component product for creating moulds and forms for pouring with epoxy resin. • Superior formula proven by years of experience: ✔️ Easy to use -> 1:1 mix ratio ✔️ Non-toxic -> You can work without gloves ✔️ Without smell ✔️ Long working time -> 20 minutes ✔️ European quality -> Directly from Italy ✔️ Ideal for creating moulds and frames for working with resin, polyurethanes, wax, cement and other materials ✔️ 🌿Cruelty Free, Vegan Friendly🐹

$22,00

“Pure Mold” – Translucent Liquid Silicone Rubber for Mould Making, 1:1 Mix Ratio

Images On sale “Pure Mold” – Translucent Liquid Silicone Rubber for Mould Making, 1:1 Mix Ratio Available, ready for shipping Order now to receive your product between Wednesday, April 29 and Wednesday, May 6. Shipping $16 Choose your kit: Quantity "Pure Mold" - Translucent Liquid Silicone Rubber for Mould Making, 1:1 Mix Ratio quantity The kit: 1 KG (500 GR of A + 500 GR of B) $52,95 Original price was: $52,95.$44,95Current price is: $44,95.-15% 💰 You save $8.00 TRANSLUCENT AND FAST CASTING LIQUID SILICONE RUBBER FOR MOULDS 🧪【INNOVATIVE FORMULA】Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use. 💎【IMPECCABLE QUALITY】Guarantees the creation of resistant and detailed moulds that will last over time and will be reusable several times! 🌿【SAFE AND CERTIFIED】 100% Made in Italy, guaranteed by a Certificate of Non-toxicity and solvent-free and odorless, this rubber is configured as a safe and easy to use product! ⚙️【EASY TO USE】 Mixing ratio 1: 1; Hardness: 13 Shore; Catalysis in about 6-8 hours. The poly additive formula makes it more resistant than other silicones, allowing the creation of higher quality molds. + Easy mixing ratio 1:1 + Less mould shrinkage over time + 30% longer service life + Fast (6-8H) + Translucent + Resistant Good for: epoxy resins, polyester, polyurethanes and acrylics, cements and plasters.+ Liquid 🌿Cruelty Free, Vegan Friendly🐹

$44,00