Sealing sentimental objects

"River-Table" Complete Kit for Creating Your First Table

This BEGINNER kit includes: -2.1 gal (8 kg) epoxy resin for castings up to 0.8 In-Glossy “Shiny Shield” release film (32cm*2m)-17,6 oz (500 gr) Non-toxic silicone paste to seal your frame-Polishing KIT (polishing pads 6pcs + professional polishing paste 250ml)-2 Blue pigment pastas-Detailed instructions on how to create the formwork step by step and pour the resin.🎁Free gloves + mixing sticks + InstructionThe kit is sufficient to create a table with an area of 10.7 square feet (e.g. 17.7 In x 31,5 In, thickness 0.8 In) – These quantities are calculated by simulating a “classic” 2/3 wood and 1/3 resin table. For any queries or if you may need some advice, please contact the ResinPro technical team.

$270,49

"Vertical Glass" - Decorative Epoxy Wall Covering for Vertical and Inclined Surfaces

3.4 kg kit (120 oz) * 3pcs

$315,49

Wood Stain – Highly Concentrated Water-Based Stain 8.5oz

About “Wood Stain" - a highly concentrated stain used for staining both old and new wooden surfaces: Use it to stain any type of wood for indoor or outdoor use. A highly concentrated wood stain that stains wood in one simple application. The formulation is water-based and so is safe to use in all environments, has a very low odour and is non-toxic. Wood Stain is specially formulated to evenly dye wood, ensuring equal and even colour penetration throughout. The stain dries to a natural matt finish in only 10 minutes and has excellent coverage. 1 Litre of Wood Stain will cover approximately 12m2  After staining wood, you should finish the job by sealing the stain in with one of Wood Waxes, Wood Varnishes or Wood Oils. These will enhance the colour of the stain further, provide additional protection and can be used to alter the finish to either satin or gloss. 💥Suitable for: You can use Wood Stain on any wood, just make sure it has been thoroughly cleaned and any old finishes removed. Store in a cool dry place, away from direct sunlight. Storage temperature should be between 8°C and 30°C. Once opened, use within one year.

$16,49

"Klebfix" - Two-Component Fast Epoxy Glue 2K 25g

$32,95

Preserving Sentimental Items

Preserving sentimental items is a method employed to conserve and safeguard memories and objects of emotional significance. This technique entails the application of transparent epoxy resins or silicone materials to form a protective coating around the item, preventing deterioration and prolonging its lifespan. Preserving can also be undertaken as a DIY project, following specific guidelines and instructions to achieve an optimal outcome. This approach is highly valued for safeguarding items with profound emotional importance, such as photographs, tickets, or jewelry, preserving them in their original state and shielding them from external factors.

Epoxy Resin for Handmade Jewelry

Epoxy resin for handmade jewelry serves as a versatile and resilient material, perfect for crafting stunning personalized accessories. This clear resin, once cured, imparts a glossy and professional finish to artisanal creations. To fashion unique jewelry pieces, thoroughly blend the epoxy resin with the hardener, incorporating dyes, glitter, or decorative elements. Subsequently, pour the mixture into molds and allow it to set. With its enduring nature and transparency, epoxy resin is an excellent choice for crafting earrings, necklaces, bracelets, and more, transforming each jewelry item into a bespoke work of art.

Silicone Molds for Artistic Projects

Silicone molds for artistic projects are adaptable and premium tools utilized in the DIY industry. Crafted from specialized silicone resins, these molds offer pliability and heat resistance, ideal for producing intricate and elaborate artistic pieces. By faithfully reproducing minute details, they facilitate the effortless creation of jewelry, embellishments, and other artistic items. Silicone mold materials are compatible with various creative techniques, including working with epoxy resins, plasters, soaps, and candles. Catering to crafting enthusiasts and artists, these molds enable the crafting of distinctive and personalized artworks.

Epoxy Resin Colorants

Epoxy resin colorants are pigments employed to tint epoxy resin, a versatile and enduring material. These colorants are available in diverse forms, such as powder, liquid, or paste, offering a broad spectrum of vivid and vibrant hues. To achieve optimal results, precise measurement of the pigments based on the resin quantity is crucial, ensuring thorough mixing for uniform color dispersion. It is advisable to conduct a test on a sample before proceeding with the final project to ascertain the desired color outcome.

"Liquid Mold" - Casting Liquid Silicone Rubber, 15/20 Shore A, 2-Part for Mold-Making

CASTING LIQUID SILICONE RUBBER – for mold-making. Two-component A + B. Liquid silicone rubber for mold-making; able to penetrate everywhere and to reproduce every small detail. It is suitable for making molds for small objects, even with very fine details and noticeable undercuts. Liquid Silicone Rubber for Making Highly Detailed Molds. Compatible with Resin, Soap and Polymer Pastes. Ideal for multiple reproductions of models and complex shapes and jewelry of any kind. White Color – Mixing Ratio: 100: 2 by weight (for 20 Shore type), 100:3 by weight (for 15 Shore type). Complete cure in 12 hours. Liquid medium-hard condensation pourable silicone rubber. It possesses high mechanical characteristics, and it is suited for the preparation of molds with fine details: reproduction of bronze statues (artistic foundries), serial reproduction of complex objects in resin (polyester, polyurethane and epoxy), in plaster, natural and synthetic wax, concrete (e.g., statues, decorative garden items, decorative candles, prototypes, decorative ceramics, rosettes, frames, faux wood decorations, etc.). Castings for technical products. Technical Features: + Mix ratio: 100: 2 by weight (for 20 Shore type), 100:3 by weight (for 15 Shore type), + Pot Life – 60-80 min; + Pouring time – 60-80 min; + Demold time – 12 hours; + Hardness – 20 + -3 Shore A + Color – white, semi-gloss.

“NatuResin” - Mineral Resin and Water-Based Casting System

Sphere-Shaped Silicone Mold – 1 Inch Diameter, Semi-Transparent, Reusable

SILICONE MOLD FOR HANDCRAFTS. Easy to use, highly polished and perfect for creating beautiful jewellery or decorations. Suitable to be used with soap, plaster, resin, ice, ceramic, clay, wax and other casting materials proper for DIY. Molds for objects, jewels and chocolate. DO-IT-YOURSELF. Material: Silicone, Colour: Semi-transparent; Reusable, non-stick, easy to use and clean. Measures of each mold: 2.5 x 2.5 CM [0,98" x 0,98"] Warning: do not use aggressive solvents, High-quality molds, heat- resistant: -40°C to + 210°C [-104° F to +410° F]

$7,49

Small Glass Jewellery Box Silicone Mould for DIY Craft and Resin Casting

SILICONE MOULD FOR HANDCRAFTS. Easy to use, highly polished and perfect for creating beautiful jewellery or decorations. Suitable to be used with soap, plaster, resin, ice, ceramic, clay, wax and other casting materials proper for DIY. Moulds for objects, jewels and chocolate. DO-IT-YOURSELF. Material: Silicone, Colour: Semi-transparent; Reusable, Non-stick, Easy to use and clean. Measures of each mould: 5 CM [1,96"] / 3.5 CM [1,37"] Warning: do not use aggressive solvents, High-quality moulds, heat- resistant: -40°C to + 210°C [-104° F to +410° F]

$5,95