Avoid smudges in silicone molds

"Liquid Mold" - Casting Liquid Silicone Rubber, 15/20 Shore A, 2-Part for Mold-Making

CASTING LIQUID SILICONE RUBBER – for mold-making. Two-component A + B. Liquid silicone rubber for mold-making; able to penetrate everywhere and to reproduce every small detail. It is suitable for making molds for small objects, even with very fine details and noticeable undercuts. Liquid Silicone Rubber for Making Highly Detailed Molds. Compatible with Resin, Soap and Polymer Pastes. Ideal for multiple reproductions of models and complex shapes and jewelry of any kind. White Color – Mixing Ratio: 100: 2 by weight (for 20 Shore type), 100:3 by weight (for 15 Shore type). Complete cure in 12 hours. Liquid medium-hard condensation pourable silicone rubber. It possesses high mechanical characteristics, and it is suited for the preparation of molds with fine details: reproduction of bronze statues (artistic foundries), serial reproduction of complex objects in resin (polyester, polyurethane and epoxy), in plaster, natural and synthetic wax, concrete (e.g., statues, decorative garden items, decorative candles, prototypes, decorative ceramics, rosettes, frames, faux wood decorations, etc.). Castings for technical products. Technical Features: + Mix ratio: 100: 2 by weight (for 20 Shore type), 100:3 by weight (for 15 Shore type), + Pot Life – 60-80 min; + Pouring time – 60-80 min; + Demold time – 12 hours; + Hardness – 20 + -3 Shore A + Color – white, semi-gloss.

$19,49

"I–Gum" - Non-Toxic Silicone Putty for Mould Making

"I-GUM" - Non-Toxic Silicone Rubber - Paste Form Completely non-toxic silicone rubber in paste to be directly applied onto the model you want to replicate. Prior to using, it should be mixed with its catalyst paste (in equal parts, 1: 1) until you have a homogeneous mixture. Due to its non-stick performance on all surfaces, you don’t need to wash the tools after use and it is not necessary to apply other release agents to the model. In addition to copying the shape of small products, this silicone is ideal for creating the moulds of coasters, trays and other similar decorations: the sides are made of silicone, and the base is made of plexiglass or films.

$26,99

"Epoxy Polish" - Resin Polishing Kit with Cream and Abralon Sanding Pads

Resin Pro offers the possibility to achieve a perfect polishing by using different types of abrasive pastes. It can be used by hand or with an orbital polisher to make your resin creations shiny. Ebonite Abralon Sanding Pads Cosmetically appealing, consistent scratch pattern provides excellent traction. Combines the benefits of abrasive cloth and non-woven products. Opening in the fabric allows water to flow freely around the abrasive. Solid surface and foam backing provide even surface pressure. Last 5+ times longer than sandpaper. Use wet or dry (residual material can be removed by high pressure air). Now it's possible to get the most aggressive surface texture without that "cheese grater" look. Abralon sanding pads use silicon carbide particles that are precision sifted to a consistent grain size, then bonded evenly to a six-inch round fabric face for the most even scratch pattern available. WARNINGS: During processing, use protective masks, gloves, and other protective clothing. In case of contact with eyes, immediately rinse with cold water for 15 minutes and immediately consult a doctor. The kits may include by variations:  EpoxyPolish Polishing cream – 250 ml [8,79 oz] - 1pc Ebonite Abralon Sanding Pads: - Ebonite Abralon Sanding Pad 150mm 360 grit - 1pc - Ebonite Abralon Sanding Pad 150mm 500 grit - 1pc - Ebonite Abralon Sanding Pad 150mm 1000 grit - 1pc - Ebonite Abralon Sanding Pad 150mm 2000 grit - 1pc - Ebonite Abralon Sanding Pad 150mm 3000 grit - 1pc - Ebonite Abralon Sanding Pad 150mm 4000 grit - 1pc EpoxyPolish Polishing cream   How to Use: Step 1: Thoroughly clean the surface with a cloth. Step 2: Now you can polish by hand or with an orbital polisher. We recommend using the lowest possible speed to get the best result. Start Polishing with 360-500 grit. Note: Sand the entire surface evenly with circular movements and light pressure. Moisten the pad or the surface with water from time to time. Step 3: Now use the 1000 grit sandpaper. Note: Moisten the sandpaper or the surface with water from time to time. Step 4: Afterwards, use 2000 grit sandpaper. Note: Moisten the sandpaper or the surface with water from time to time. Lastly, use 4000 grit sandpaper to finish sanding. Step 5: Remove the sandpaper from the polishing disc and attach a soft sponge to it. Rinse the surface or wipe it with a damp cloth to remove any residual grain of the sanding. Step 6: Apply EpoxyPolish Polishing cream on the damp sponge. Use by hand or with an orbital polisher, using a large circular motion and exerting slight pressure. Step 7: Clean the surface with plenty of water to remove all the remaining residues. Step 8: Enjoy the result!!!

$21,49

“Shiny Shield” – Glossy Release Film for Coasters and Table Frames

"SHINY SHIELD" - Glossy Release Film For Coasters & Table`s Frames Great tool for achieving the best results: ✔️ "Shiny Shield" release Film for Epoxy, Polyurethane and Acrylic Resins. ✔️ Transparent, adhesive and easily removable, it won’t leave any sticky traces on the workpiece; ✔️ Applicable on ALL SURFACES; ✔️ Specifically developed for CASTING FORMWORK EXTERNAL COATINGS. It is easy to apply without unevenness, creating a smooth, glossy and bubble-free surface, which will help easily release your epoxy project from the frame; ✔️ Once the resin has solidified, the "Shiny Shield" film can be easily removed, leaving a HIGHLY POLISHED even surface; ✔️ REUSABLE several times; ✔️ It does not require any kind of additional treatment and it is IMMEDIATELY READY to be poured. For any queries or if you may need some advice, please contact the ResinPro technical department!

$4,62

Prevent Smudges in Silicone Molds

To prevent smudges in silicone molds, it is crucial to adhere to some best practices during the processing. Here are some helpful tips:

• Ensure that the silicone molds are clean and free of residues before use.
• Use high-quality epoxy resins or silicone materials for greater precision in the final result.
• Pour the material slowly into the mold to prevent air bubbles, which can lead to smudges.
• Carefully level the surface of the poured material in the mold to achieve a uniform finish.
• Follow the manufacturer's instructions for the drying and hardening times of the material.
• Handle the mold carefully during the extraction phase to avoid damage and smudges.

Prevent Epoxy Resin Mixing Errors

To avoid mistakes in epoxy resin mixing, it is essential to meticulously follow the manufacturer's instructions. Here are some valuable tips:

• Use precise measuring tools to accurately dose the amounts of resin and hardener.
• Gently mix the two components for the prescribed time and manner to avoid introducing air into the mixture.
• Scrape the sides and bottom of the container well during mixing to ensure even distribution.
• Avoid adding excessive resin or hardener to prevent incomplete polymerization issues.
• Follow the recommended processing and curing times for optimal results.

Prevent Air Bubbles in Epoxy Resin

To prevent the formation of air bubbles in epoxy resin during processing, follow these precautions:

• Ensure materials and tools are at room temperature before pouring the resin.
• Mix the resin slowly to prevent air incorporation.
• Use a slow and controlled pouring method to minimize air entrapment.
• Utilize a vacuum chamber to remove air bubbles from the resin before pouring.
• If needed, use a brush to push air bubbles outwards for a bubble-free result.

Techniques for Achieving Smooth Surfaces with Epoxy Resin

To achieve smooth surfaces with epoxy resin, follow these specific techniques:

• 1. Surface preparation: Ensure the surface is clean, dry, and free of dust or grease.
• 2. Resin application: Pour the resin evenly onto the surface and level it with a brush or spatula.
• 3. Air bubble removal: Use a gas torch or heat gun to eliminate trapped air bubbles in the resin.
• 4. Sanding: After the resin has hardened, sand the surface with fine-grit sandpaper for a smooth finish.
• 5. Finishing: Apply a clear finish to protect the surface and give it a glossy appearance for a professional look.

Coloring Epoxy Resin Evenly

To achieve uniform coloration of epoxy resin, follow these steps carefully:

• 1. Pigment selection: Use specific resin pigments and measure them following the manufacturer's instructions.
• 2. Mixing: Add the pigment to clear resin and mix thoroughly for 2-3 minutes to avoid lumps.
• 3. Agitation: Gently stir the mixture to prevent air bubbles that may affect color uniformity.
• 4. Pouring: Slowly pour the colored resin into molds or onto surfaces to maintain color consistency.
• 5. Leveling: Use a stick or spatula to level the resin for an even thickness and homogeneous appearance.

Following these steps will result in professional and uniform coloration of the resin.

3 Layer Fruit Plate Silicone Mold Kit – Set of 3 for Resin Crafts and Trays

HIGH-QUALITY SILICONE MOULD FOR HANDCRAFTS This flat Coaster Mould has a smooth interior and produces a beautiful coaster with a professional finish. Use our heat-resistant resin to make something that is not only functional but also ideal for making three-tier fruit and dessert trays, coasters, decorative elements and home and office decorations. This product can be reused over the years. The Set includes: Silicone molds: D. 155 mm – 1 pcs → 6.1 in – 1 pc D. 205 mm – 1 pcs → 8.1 in – 1 pc D. 255 mm – 1 pcs → 10.0 in – 1 pc Support rod (by variation): 110 mm – 2 pcs → 4.3 in – 2 pcs 122 mm x P. 47 – 1 pcs → 4.8 in x P. 1.9 – 1 pc If you're using these moulds to make coasters, we recommend that you add a 3mm thick clear layer of Heat-Resistant resin first in your mould. Let it set and then add more resin with colour, ink, glitter, flowers etc. Once turned out (after 3-4 days), what was the bottom will be the top and heat-resistant up to 200C! Remember that our Heat-Resistant resin needs up to 72 hours to achieve full cure, so don't place a hot cup on it too early. DO-IT-YOURSELF. Material: Silicone, Colour: Semi-transparent; Reusable, Non-stick, Easy to use and clean.   Warning: do not use aggressive solvents, High-quality moulds, heat-resistant: -40°C to + 210°C [-104° F to +410° F]  

$17,49

Round Tray Silicone Mold ⌀26cm for DIY Resin Coasters and Trays

HIGH-QUALITY SILICONE MOULD FOR HANDCRAFTS This flat Coaster Mould has a smooth interior and produces a beautiful coaster with a professional finish. Use our heat-resistant resin to make something that is not only functional. Dimensions: D.26 cm Height: 1cm If you’re using these moulds to make coasters, we recommend that you add a 3mm thick clear layer of Heat-Resistant resin first in your mould. Let it set and then add more resin with colour, ink, glitter, flowers etc. Once turned out (after 3-4 days), what was the bottom will be the top and heat-resistant up to 20oC! Remember that our Heat-Resistant resin needs between 72 h to achieve full cure, so don’t place a hot cup on it too early. DO-IT-YOURSELF. Material: Silicone, Colour: Semi-transparent; Reusable, Non-stick, Easy to use and clean.   Warning: do not use aggressive solvents, High-quality moulds, heat-resistant: -40°C to + 210°C [-104° F to +410° F]

$13,20

Crystal Cone Silicone Mold for DIY Crafts and Jewelry, 3.5x2.5cm

SILICONE MOULD FOR HANDCRAFTS. Easy to use, highly polished and perfect for creating beautiful jewellery or decorations. Suitable to be used with soap, plaster, resin, ice, ceramic, clay, wax and other casting materials proper for DIY. Moulds for objects, jewels and chocolate. DO-IT-YOURSELF. Material: Silicone, Colour: Semi-transparent; Reusable, non-stick, easy to use and clean. Measures of each mould: 3.5 x 2.5 CM [1,37" x 0,98"] Warning: do not use aggressive solvents, High-quality moulds, heat- resistant: -40°C to + 210°C [-104° F to +410° F]

$5,95

"Tray" - Silicone Mould for Resin, 30.5x17cm

Professional mold "tray" composed of high quality silicone for resin creations. Excellent for making coasters, decorative elements, and home or office decor, this product can be reused over the years. Size: 30.5 cm x 17 cm Thickness:1 cm Color: white The mold is characterized by flexibility and versatility of use. Resistant to temperatures ranging from -60° C to +230° C. Ideal for professional use in the decorative world. Advantage: * Easy storage * Easy to wash, does not change the shape for long time. * Easy extraction Please, pay your attention! Handles are not included.   Copyright © Resin Pro Srl. The reproduction (total or partial) of the work by any means made and its making available to third parties, either free of charge or for a fee is prohibited.

$11,66