Microcement is suitable for raised floors

“Art Pro Deluxe” – Ultra-High Viscosity Epoxy Resin for Artists

• "Art Pro Deluxe" non-toxic ultra-high viscosity epoxy resin for artists. The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE. • Beloved by many artists around the world: ✔️ ULTRA HIGH viscosity -> easy control lines in resin and geode- art (coasters, trays, paintings) ✔️ Amazing glossy and self-levelling surface ✔️ High scratch resistance -> ideal for finish layers and use for coasters and trays ✔️ UV filter for protection against yellowing -> 10 years warranty ✔️ Safe and Certified -> Non-toxic, Solvent-free, non-flammable, and totally safe ✔️ High transparency -> a true liquid crystal ✔️ Easy to use -> fast curing time (1st stage - 10-12h; 2nd - 18h) ✔️ Trusted quality -> Thousands customers since 2015 Check and tag our social media for inspiration! We always happy to publish your art-work –Instagram Logo Icon - Download in Gradient Style 🌿Cruelty Free, Vegan Friendly🐹

$41,00

““Epoxytable 5-Five” – Deep Pour Epoxy Resin for Tables and Large Projects, Casting up to 2 Inches

• “EPOXYTABLE 5-FIVE” - deep pour epoxy resin for tables & large projects. Free 25ml pigment* + Gloves + Detailed instruction. • The best choice for deep pouring: ✔️ Low exothermic reaction –> castings up to 5cm [1,96”] ✔️ Strong UV filters –> non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> bubbles free ✔️ Long working time –> no rush in the process ✔️ Heat resistance –> up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 ✔️ Cruelty Free, Vegan Friendly🐹

$41,00

“Icrystal” – Clear Epoxy Resin, Two-Part, Water Clear Casting & Coating

iCrystal Epoxy Resin At A Glance Description: Water clear, two-part, multipurpose epoxy resin Uses: Casting resin for table tops, jewelry, or as a coating for artworks Thickness: Maximum of 5/8'' (1.5cm) per layer in tabletop applications Viscosity: Low viscosity, quick sheds bubbles Working Time: 15-30 minutes, depending upon mixture volume Initial Cure Time: 1-4 Hours, depending upon volume and room temperature Compatibility: Alcohol-based colorants, inert powders, dried organic materials Mix Ratio: 2 parts A to 1 part B, by weight (Not volume) Characteristics: Non-Yellowing, scratch resistant, Vegan-friendly

$10,12

“Art Pro” – Epoxy Resin for Artists & Surface Coating, Medium Viscosity

• "Art Pro" - Ultra Clear Non Toxic Medium Viscosity Epoxy Resin for Artists. The best choice for Resin Art, Coasters, Trays, Ocean and Geode Art and coating surfaces + gloves & detailed instruction for FREE. • Superior formula proven by years of experience: ✔️ High transparency -> a true liquid crystal ✔️ Amazing glossy and self-levelling surface ✔️ High scratch resistance -> ideal for Surface and Floor coverings ✔️ UV filter for protection against yellowing -> 10 years warranty ✔️ Medium viscosity -> ideal for Resin Art (on surfaces & coasters and trays) ✔️ Easy to use -> 3:2 mixing ratio ✔️ Trusted quality -> Thousands customers since 2015 ✔️ Cruelty Free, Vegan Friendly🐹

$38,00

“Colorfun” – Liquid Epoxy Resin Colouring Paste Set, Translucent Effect, 10 x 25ml

Intense and brilliant color, ideal for Transparent Epoxy Resins. Mix small quantities to get a translucent effect. The high coverage of the “Colorful Original” range allows to obtain a full and bright color. The high concentration provides an opaque color with a few drops. Usable to color the products of the RESIN PRO range. 💥 Ideal for epoxy creations and resin tables thanks to its features: ✔️ Intense colors ✔️ Easy to mix ✔️ Intense colors ✔️ High concentration ✔️ Easy to get a translucent effect ✔️ 5 stars on Trustpilot 🌿Cruelty Free, Vegan Friendly🐹

$16,00

“I–GUM” – Non-Toxic Silicone Putty for mould making

• "I-GUM" - Non-Toxic Silicone Rubber - Paste Form Pasty silicone rubber "I-GUM" is a two–component product for creating moulds and forms for pouring with epoxy resin. • Superior formula proven by years of experience: ✔️ Easy to use -> 1:1 mix ratio ✔️ Non-toxic -> You can work without gloves ✔️ Without smell ✔️ Long working time -> 20 minutes ✔️ European quality -> Directly from Italy ✔️ Ideal for creating moulds and frames for working with resin, polyurethanes, wax, cement and other materials ✔️ 🌿Cruelty Free, Vegan Friendly🐹

$22,00

“Pure Mold” – Translucent Liquid Silicone Rubber for Mould Making, 1:1 Mix Ratio

Images On sale “Pure Mold” – Translucent Liquid Silicone Rubber for Mould Making, 1:1 Mix Ratio Available, ready for shipping Order now to receive your product between Wednesday, April 29 and Wednesday, May 6. Shipping $16 Choose your kit: Quantity "Pure Mold" - Translucent Liquid Silicone Rubber for Mould Making, 1:1 Mix Ratio quantity The kit: 1 KG (500 GR of A + 500 GR of B) $52,95 Original price was: $52,95.$44,95Current price is: $44,95.-15% 💰 You save $8.00 TRANSLUCENT AND FAST CASTING LIQUID SILICONE RUBBER FOR MOULDS 🧪【INNOVATIVE FORMULA】Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use. 💎【IMPECCABLE QUALITY】Guarantees the creation of resistant and detailed moulds that will last over time and will be reusable several times! 🌿【SAFE AND CERTIFIED】 100% Made in Italy, guaranteed by a Certificate of Non-toxicity and solvent-free and odorless, this rubber is configured as a safe and easy to use product! ⚙️【EASY TO USE】 Mixing ratio 1: 1; Hardness: 13 Shore; Catalysis in about 6-8 hours. The poly additive formula makes it more resistant than other silicones, allowing the creation of higher quality molds. + Easy mixing ratio 1:1 + Less mould shrinkage over time + 30% longer service life + Fast (6-8H) + Translucent + Resistant Good for: epoxy resins, polyester, polyurethanes and acrylics, cements and plasters.+ Liquid 🌿Cruelty Free, Vegan Friendly🐹

$44,00

“Epoxy Polish” – Resin Polishing Kit with Cream and Abralon Sanding Pads

Great way to add some glossy finish to your epoxy project! Was made especially for resin world. Resin Pro offers the possibility to achieve a perfect polishing by using different types of abrasive pastes. It can be used by hand or with an orbital polisher to make your resin creations shiny.

$36,00

Microcement is Ideal for Raised Floors

Microcement can be a fantastic option for raised floors due to its exceptional resistance and versatility. Here's why:

• Resistance: Microcement is a highly durable and resistant coating that can withstand the weight and wear typical of raised floors.
• Thin Thickness: With its very thin thickness, microcement is perfect for applying on raised floors without adding excessive weight.
• Adhesion to Various Surfaces: Microcement can be applied to various existing surfaces such as tiles or concrete, making it ideal for renovating floors without the need for removal.
• Waterproof: Thanks to its waterproof properties, microcement is ideal for raised floors that may be exposed to moisture or water infiltration.
• Easy Maintenance: Microcement floors are easy to clean and require minimal maintenance over time, making them ideal for raised floors in high-traffic areas.

In conclusion, microcement is an excellent choice for raised floors due to its resistance, thin thickness, adhesion to various surfaces, waterproofing, and easy maintenance.

Application of Microcement on Existing Floors

Microcement can be applied to existing floors with certain conditions and precautions. Here's what to consider before proceeding with the application:

• Floor Preparation: Ensure the existing floor is clean, dry, and free from dust, grease, or any other contamination that could affect the adhesion of the microcement.
• Check Floor Conditions: Make sure the floor is stable and free from cracks, fractures, or other structural defects that could compromise the application of microcement.
• Primer and Adhesive Base: Using a primer or specific adhesive base may be necessary to ensure optimal bonding between the existing floor and the new coating.
• Application Thickness: Evaluate if the existing floor can accommodate the limited thickness of microcement without affecting the height of doors or architectural details.
• Professional Consultation: It's advisable to consult with an experienced professional in microcement application to ensure a successful and long-lasting result.

By following these guidelines and seeking professional help, microcement can be applied to existing floors, transforming spaces with a modern, durable, and easy-to-maintain coating.

Surface Requirements for Microcement Application

Proper surface preparation is crucial for the correct application of microcement and achieving a long-lasting result. Consider the following surface requirements:

• Cleaning: Thoroughly clean the surface to remove dust, dirt, grease, and residues of old coatings using specific detergents and degreasers.
• Dryness: Ensure the surface is completely dry before applying microcement to prevent compromising adhesion and durability.
• Stability: Check for stability and the absence of cracks, fissures, or imperfections that could affect the application and resistance of microcement.
• Uniformity: The surface should be uniform and free from significant level differences and irregularities. Correct any imperfections with cement-based mortars if needed.
• Primer: Applying a specific primer may be necessary to improve adhesion, especially on absorbent or smooth surfaces.

By carefully following these surface requirements, optimal application of microcement can be achieved, ensuring durability over time.

Preparing a Raised Floor for Microcement Application

To prepare a raised floor for microcement application, follow these steps:

Cleaning and Floor Preparation:

Remove dirt or grease residues from the surface.

Ensure the floor is dry and free from moisture.

Check for cracks or irregularities that could affect the application.

Primer Application:

Apply a specific primer for porous surfaces to enhance adhesion.

Follow the manufacturer's instructions for dosage and drying times.

Microcement Application:

Prepare and apply the microcement following the manufacturer's instructions.

Allow the microcement to dry for the recommended time.

Finishing and Protection:

Sand the dry microcement for a smooth surface.

Apply a sealant to protect the floor from wear, stains, and moisture.

By following these steps meticulously, you can correctly and durably prepare your raised floor for microcement application.

“Colorfun” – Liquid Epoxy Resin Colouring Paste Set, Translucent Effect, 10 x 25ml

Intense and brilliant color, ideal for Transparent Epoxy Resins. Mix small quantities to get a translucent effect. The high coverage of the “Colorful Original” range allows to obtain a full and bright color. The high concentration provides an opaque color with a few drops. Usable to color the products of the RESIN PRO range. 💥 Ideal for epoxy creations and resin tables thanks to its features: ✔️ Intense colors ✔️ Easy to mix ✔️ Intense colors ✔️ High concentration ✔️ Easy to get a translucent effect ✔️ 5 stars on Trustpilot 🌿Cruelty Free, Vegan Friendly🐹

$16,00

“I–GUM” – Non-Toxic Silicone Putty for mould making

• "I-GUM" - Non-Toxic Silicone Rubber - Paste Form Pasty silicone rubber "I-GUM" is a two–component product for creating moulds and forms for pouring with epoxy resin. • Superior formula proven by years of experience: ✔️ Easy to use -> 1:1 mix ratio ✔️ Non-toxic -> You can work without gloves ✔️ Without smell ✔️ Long working time -> 20 minutes ✔️ European quality -> Directly from Italy ✔️ Ideal for creating moulds and frames for working with resin, polyurethanes, wax, cement and other materials ✔️ 🌿Cruelty Free, Vegan Friendly🐹

$22,00

“Pure Mold” – Translucent Liquid Silicone Rubber for Mould Making, 1:1 Mix Ratio

Images On sale “Pure Mold” – Translucent Liquid Silicone Rubber for Mould Making, 1:1 Mix Ratio Available, ready for shipping Order now to receive your product between Wednesday, April 29 and Wednesday, May 6. Shipping $16 Choose your kit: Quantity "Pure Mold" - Translucent Liquid Silicone Rubber for Mould Making, 1:1 Mix Ratio quantity The kit: 1 KG (500 GR of A + 500 GR of B) $52,95 Original price was: $52,95.$44,95Current price is: $44,95.-15% 💰 You save $8.00 TRANSLUCENT AND FAST CASTING LIQUID SILICONE RUBBER FOR MOULDS 🧪【INNOVATIVE FORMULA】Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use. 💎【IMPECCABLE QUALITY】Guarantees the creation of resistant and detailed moulds that will last over time and will be reusable several times! 🌿【SAFE AND CERTIFIED】 100% Made in Italy, guaranteed by a Certificate of Non-toxicity and solvent-free and odorless, this rubber is configured as a safe and easy to use product! ⚙️【EASY TO USE】 Mixing ratio 1: 1; Hardness: 13 Shore; Catalysis in about 6-8 hours. The poly additive formula makes it more resistant than other silicones, allowing the creation of higher quality molds. + Easy mixing ratio 1:1 + Less mould shrinkage over time + 30% longer service life + Fast (6-8H) + Translucent + Resistant Good for: epoxy resins, polyester, polyurethanes and acrylics, cements and plasters.+ Liquid 🌿Cruelty Free, Vegan Friendly🐹

$44,00

“Epoxy Polish” – Resin Polishing Kit with Cream and Abralon Sanding Pads

Great way to add some glossy finish to your epoxy project! Was made especially for resin world. Resin Pro offers the possibility to achieve a perfect polishing by using different types of abrasive pastes. It can be used by hand or with an orbital polisher to make your resin creations shiny.

$36,00