Microcement can be applied on previously painted surfaces.

"Vertical Glass" - Decorative Epoxy Wall Covering for Vertical and Inclined Surfaces

Coating for inclined or vertical walls and surfaces / This epoxy formulation allows you to coat surfaces and walls with a transparent layer or decorate them with a colored layer, resulting in a glossy, washable and waterproof surface. The Vertical Glass resin differs from normal resins allows creatives to create sharp shapes and designs on surfaces and canvases without the resin mixing unintentionally losing the original design! Transparent, UV-resistant epoxy system that creates a hard, glossy protective layer. Vertical Glass allows you to keep your initial design, faithfully respecting your creative idea! The surface will be perfectly smooth and resistant to moisture. Solvent-free and odorless epoxy resin. Applications: Floors and Walls (pre-existing) also vertical; Protection of material coatings and other artistic decorations; Coating, repair and decoration of shower trays and sanitary ware; Coating of surfaces, objects and furniture to give depth and brilliance to the color, even in Vertical! Features: For a smooth coating, it is applied with a spatula to the surface of any material: tile, concrete, wood, brick, etc. It has good hiding power, and completely covers the work surface in one application Creates a glossy, smooth and moisture-resistant layer To create a matte surface, it is easily sanded (48 hours after application, with a grain size of 1000-2000 P) Protects from moisture and gives a new life to surfaces It can be painted with dyes and pigments from our assortment Does not self-align: saves the drawing that you set for it 🙂 Please note that in the unpainted form, the material is not completely transparent, and there is a slight “milky” shade with almost imperceptible micro-particles, so we recommend painting it It is used for: Floor coverings, walls, furniture and other surfaces Protection of surfaces of materials Painting, repair and decoration of showers and bathrooms Creation of paintings, murals and other works of art  

$109,49

"Coasters" – Create Your Own Resin Coasters Kit

Creative Kit: Create your own coasters in Naturesin KIT INSTRUCTIONS This kit contains: 1 kg of mineral resin Silicone mould for 4 coasters 5 colors specific to Naturesin Gloves and mixing tools You will also need: Water Lay out a plastic tarp or old newspapers to protect the work surface. Make sure that the silicone mould is clean and all materials are at hand. Using a scale, weigh Naturesin powder and water in a ratio of 100:27 by weight. For every 100 grams of Naturesin powder, you will need 27 grams of water. Add Naturesin powder to the water slowly, constantly and thoroughly mixing so that the powder and water form a homogeneous creamy compound. Follow these two steps for about 10 minutes before the mixture begins to solidify. Pour the mixture into several cups/containers. Colour each part by adding a few drops of dye, mixing thoroughly to get the desired shades. Pour mixtures of different colours into different places of the silicone mould to create interesting colour effects. If you notice air bubbles, gently shake the mould (let it vibrate) to bring them to the surface and help them disappear. Allow the casting to harden for 40-60 minutes. After 1 hour, your creations can be removed from the moulds, but over the next 4-8 hours they will continue to harden and gain greater hardness. Sometimes, with the use of dyes, the curing time may be longer - take your time, Naturesin works for you! Other methods! Alternative methods: 1. For a visually impressive design, start by mixing a small portion of powder with water using the same ratio of 100:27. Add the desired colour to this mixture and apply it to the mould, creating drops or stripes. Allow this first layer to harden for 30-40 minutes. 2. After the initial layer hardens, prepare the basic powder mixture with water. Use a contrasting colour. Fill the mould with this contrasting composition, which will blend beautifully with the previously hardened layer. In addition, select the mosaic effect by completely filling the mould with a Naturesin mixture coloured according to your choice. As soon as the material is completely solidified, take it out of the mould and break it into small pieces. Put these fragments back into the mould and fill the spaces with a new mixture of Naturesin powder and water, using a different colour - the effect will be great!

$55,95

“Art Pro Deluxe” – Ultra-High Viscosity Epoxy Resin for Artists

• "Art Pro Deluxe" non-toxic ultra-high viscosity epoxy resin for artists. The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE. • Beloved by many artists around the world: ✔️ ULTRA HIGH viscosity -> easy control lines in resin and geode- art (coasters, trays, paintings) ✔️ Amazing glossy and self-levelling surface ✔️ High scratch resistance -> ideal for finish layers and use for coasters and trays ✔️ UV filter for protection against yellowing -> 10 years warranty ✔️ Safe and Certified -> Non-toxic, Solvent-free, non-flammable, and totally safe ✔️ High transparency -> a true liquid crystal ✔️ Easy to use -> fast curing time (1st stage - 10-12h; 2nd - 18h) ✔️ Trusted quality -> Thousands customers since 2015 Check and tag our social media for inspiration! We always happy to publish your art-work –Instagram Logo Icon - Download in Gradient Style 🌿Cruelty Free, Vegan Friendly🐹

$41,00

““Epoxytable 5-Five” – Deep Pour Epoxy Resin for Tables and Large Projects, Casting up to 2 Inches

• “EPOXYTABLE 5-FIVE” - deep pour epoxy resin for tables & large projects. Free 25ml pigment* + Gloves + Detailed instruction. • The best choice for deep pouring: ✔️ Low exothermic reaction –> castings up to 5cm [1,96”] ✔️ Strong UV filters –> non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> bubbles free ✔️ Long working time –> no rush in the process ✔️ Heat resistance –> up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 ✔️ Cruelty Free, Vegan Friendly🐹

$41,00

**Can Microcement be Applied on Previously Painted Surfaces?**

Microcement can be applied on surfaces that have been previously painted, but proper preparation of the base is essential to ensure a correct and long-lasting application. Here are the steps to consider:

• **Cleaning the Surface: ** Before applying microcement, it is crucial to thoroughly clean the painted surface to remove any dirt, dust, or grease residues. Using specific detergents is recommended, and ensure the surface is completely dry before proceeding.
• **Sanding: ** To improve the adhesion of the microcement, lightly sanding the painted surface with fine sandpaper is advised. This step removes the gloss of the paint, creating a rough surface that helps anchor the new coating.
• **Primer: ** After cleaning and sanding, applying a suitable primer for painted surfaces is recommended. The primer will enhance the adhesion of the microcement and ensure a uniform result.
• **Applying Microcement: ** Once the preparatory stages are completed, you can proceed with applying the microcement following the manufacturer's instructions. Working precisely and uniformly is vital to achieve an aesthetically pleasing and durable result over time.

By diligently following these steps and working carefully, it is possible to successfully apply microcement on previously painted surfaces, creatively transforming and renewing environments in a modern way.

**Can Microcement Adhere to Any Type of Surface?**

Microcement can effectively adhere to various surface types if properly prepared. Here are some key considerations:

• **Cleaning and Surface Preparation: ** Ensure the surface is clean and free from dust, grease, or residues that could impact the material's adhesion.
• **Compatible Surfaces: ** Microcement can be applied on floors, walls, furniture, countertops, bathrooms, concrete, ceramic, metal, and wood. Evaluate the surface condition carefully and perform any necessary preliminary treatment.
• **Unsuitable Surfaces: ** Microcement may not adhere well to very smooth, glossy, or constantly damp surfaces. In such cases, pre-treating the surface or exploring alternatives may be necessary.
• **Professional Advice: ** Consulting an experienced professional in the field is advisable to ensure correct and long-lasting application of microcement. This helps in assessing surface conditions and following the appropriate material preparation and installation procedures.

In conclusion, with proper surface preparation and correct application, this versatile material can effectively adhere to a wide range of surfaces, providing an aesthetic and durable result over time.

**What Is the Process of Applying Microcement on Painted Surfaces?**

To apply microcement on painted surfaces, a precise process must be followed to ensure an optimal and long-lasting result. Here are the steps to follow:

**Surface Preparation:**

Completely remove the existing paint by sanding or stripping.

Ensure the surface is clean, dry, and free from dust, dirt, or grease.

Repair any cracks or imperfections with surface filler if needed.

**Primer Application:**

Apply a specific primer for painted surfaces to enhance microcement adhesion.

Follow the manufacturer's instructions for drying times and application methods.

**Microcement Application:**

Prepare the microcement following the manufacturer's instructions regarding dosage and mixing.

Apply the microcement in thin, uniform layers using fine-toothed spatulas for a homogeneous application.

Respect drying times between layers and proceed with sanding between the various stages.

**Finishing and Sealing:**

Once the microcement application is complete, applying a specific sealer is advisable to protect the surface from wear, stains, and moisture.

Follow the manufacturer's instructions to ensure proper sealing and prolong the durability of the microcement.

By carefully following these steps and using suitable materials and products, microcement can be successfully applied on painted surfaces, achieving an aesthetic and durable result over time.

**What to Do Before Applying Microcement on a Painted Surface?**

Before applying microcement on a painted surface, it is crucial to properly prepare the substrate to ensure a correct and durable application of the coating. Here's what to do:

**Cleaning:**

Completely remove the paint from the surface using coarse sandpaper or a chemical stripper. Ensure the surface is clean and free from dust, dirt, or grease.

**Roughening:**

Create a rough surface on the removed paint to enhance microcement adhesion. Use fine sandpaper to smooth the surface.

**Filler:**

If needed, fill any holes, cracks, or imperfections on the painted surface with suitable filler. Allow it to dry completely and sand to level the surface.

**Primer:**

Apply a specific primer for painted surfaces to enhance microcement adhesion and ensure a longer lifespan of the coating.

**Microcement Application:**

Carefully follow the manufacturer's instructions to prepare and apply the microcement on the prepared surface. Respect drying times and application methods.

By following these steps, you will create a solid and well-prepared base for microcement application, ensuring a high-quality and resilient final result.

“Colorfun” – Liquid Epoxy Resin Colouring Paste Set, Translucent Effect, 10 x 25ml

Intense and brilliant color, ideal for Transparent Epoxy Resins. Mix small quantities to get a translucent effect. The high coverage of the “Colorful Original” range allows to obtain a full and bright color. The high concentration provides an opaque color with a few drops. Usable to color the products of the RESIN PRO range. 💥 Ideal for epoxy creations and resin tables thanks to its features: ✔️ Intense colors ✔️ Easy to mix ✔️ Intense colors ✔️ High concentration ✔️ Easy to get a translucent effect ✔️ 5 stars on Trustpilot 🌿Cruelty Free, Vegan Friendly🐹

$16,00

“I–GUM” – Non-Toxic Silicone Putty for mould making

• "I-GUM" - Non-Toxic Silicone Rubber - Paste Form Pasty silicone rubber "I-GUM" is a two–component product for creating moulds and forms for pouring with epoxy resin. • Superior formula proven by years of experience: ✔️ Easy to use -> 1:1 mix ratio ✔️ Non-toxic -> You can work without gloves ✔️ Without smell ✔️ Long working time -> 20 minutes ✔️ European quality -> Directly from Italy ✔️ Ideal for creating moulds and frames for working with resin, polyurethanes, wax, cement and other materials ✔️ 🌿Cruelty Free, Vegan Friendly🐹

$22,00

“Pure Mold” – Translucent Liquid Silicone Rubber for Mould Making, 1:1 Mix Ratio

Images On sale “Pure Mold” – Translucent Liquid Silicone Rubber for Mould Making, 1:1 Mix Ratio Available, ready for shipping Order now to receive your product between Wednesday, April 29 and Wednesday, May 6. Shipping $16 Choose your kit: Quantity "Pure Mold" - Translucent Liquid Silicone Rubber for Mould Making, 1:1 Mix Ratio quantity The kit: 1 KG (500 GR of A + 500 GR of B) $52,95 Original price was: $52,95.$44,95Current price is: $44,95.-15% 💰 You save $8.00 TRANSLUCENT AND FAST CASTING LIQUID SILICONE RUBBER FOR MOULDS 🧪【INNOVATIVE FORMULA】Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use. 💎【IMPECCABLE QUALITY】Guarantees the creation of resistant and detailed moulds that will last over time and will be reusable several times! 🌿【SAFE AND CERTIFIED】 100% Made in Italy, guaranteed by a Certificate of Non-toxicity and solvent-free and odorless, this rubber is configured as a safe and easy to use product! ⚙️【EASY TO USE】 Mixing ratio 1: 1; Hardness: 13 Shore; Catalysis in about 6-8 hours. The poly additive formula makes it more resistant than other silicones, allowing the creation of higher quality molds. + Easy mixing ratio 1:1 + Less mould shrinkage over time + 30% longer service life + Fast (6-8H) + Translucent + Resistant Good for: epoxy resins, polyester, polyurethanes and acrylics, cements and plasters.+ Liquid 🌿Cruelty Free, Vegan Friendly🐹

$44,00

“Epoxy Polish” – Resin Polishing Kit with Cream and Abralon Sanding Pads

Great way to add some glossy finish to your epoxy project! Was made especially for resin world. Resin Pro offers the possibility to achieve a perfect polishing by using different types of abrasive pastes. It can be used by hand or with an orbital polisher to make your resin creations shiny.

$36,00