Discover the captivating world of epoxy resin with our e-book "Mastering the Art of Epoxy Resin: Tips and Advanced Techniques." Whether you're a passionate artist, an experienced DIYer, or looking to express your creativity, this book will guide you in learning and mastering this versatile technique. This comprehensive e-book offers an in-depth opportunity to learn advanced epoxy resin manipulation techniques. You'll uncover the secrets of harmonious blends, vibrant pigments, and flawless finishes to create unique works of art. Additionally, our practical tips will help you avoid common mistakes and overcome challenges encountered when working with this fascinating material. Whether you want to create epoxy resin jewelry, make stunning paintings, or design unique decorative objects, this e-book will be your essential companion. Unleash your creativity and master the art of epoxy resin with our expert advice and detailed instructions. Download "Mastering the Art of Epoxy Resin: Tips and Advanced Techniques" now to uncover the secrets of this versatile artistic method. Develop your artistic skills and create one-of-a-kind pieces that will captivate your friends and family. Don't miss this opportunity to become an epoxy resin expert and make your artistic mark
$21,95
Dried flowers for decorating works made of epoxy resin
$7,95
HIGH-QUALITY SILICONE MOULD FOR HANDCRAFTS This flat Coaster Mould has a smooth interior and produces a beautiful coaster with a professional finish. Use our heat-resistant resin to make something that is not only functional but also ideal for making three-tier fruit and dessert trays, coasters, decorative elements and home and office decorations. This product can be reused over the years. The Set includes: Silicone molds: D. 155 mm – 1 pcs → 6.1 in – 1 pc D. 205 mm – 1 pcs → 8.1 in – 1 pc D. 255 mm – 1 pcs → 10.0 in – 1 pc Support rod (by variation): 110 mm – 2 pcs → 4.3 in – 2 pcs 122 mm x P. 47 – 1 pcs → 4.8 in x P. 1.9 – 1 pc If you're using these moulds to make coasters, we recommend that you add a 3mm thick clear layer of Heat-Resistant resin first in your mould. Let it set and then add more resin with colour, ink, glitter, flowers etc. Once turned out (after 3-4 days), what was the bottom will be the top and heat-resistant up to 200C! Remember that our Heat-Resistant resin needs up to 72 hours to achieve full cure, so don't place a hot cup on it too early. DO-IT-YOURSELF. Material: Silicone, Colour: Semi-transparent; Reusable, Non-stick, Easy to use and clean. Warning: do not use aggressive solvents, High-quality moulds, heat-resistant: -40°C to + 210°C [-104° F to +410° F]
$17,49
Professional “Flower " mould made of high quality silicone for resin creations. Excellent for making coasters, decorative items, and home or office decor, this product will be reused over the years. Size: 35cm x 1 cm Colour: White The mould is characterised by flexibility and versatility of use. Resistant to temperatures ranging from -60 C C to +230 C Ideal for professional use in the decorative world. Advantage: * Easy storage * Easy to wash, does not change the shape for a long time. * Easy extraction Warning: do not use aggressive solvents. Attention! Remove the product from the mold no later than 12 hours after pouring the resin. Otherwise, there is a chance of local adhesion of the resin to the mold.
$13,53
For better resin material flow, it's essential to adhere to the following recommendations
- Ensure the resin material is at the optimal temperature to enhance fluidity.
- Use high-quality resins with specific additives to improve workability.
- Thoroughly mix the resin with catalysts and additives following recommended proportions.
- Apply the resin using appropriate equipment like notched trowels or specialized rollers for uniform distribution.
- Avoid working in excessively hot or humid conditions that may affect material flow.
By following these guidelines, optimal resin material flow can be achieved during processing.
Epoxy Resin Application Techniques
To effectively apply epoxy resin, follow these techniques
- Prepare the surface by ensuring it is clean, dry, and free from dust or grease.
- Mix the epoxy resin with the hardener according to the manufacturer's recommended proportions.
- Pour the resin evenly onto the support, avoiding build-ups and air bubbles.
- Use a spatula or brush for even distribution.
- Remove air bubbles using a gas torch or warm brush.
- Allow the resin to dry in a dust-free and well-ventilated environment for the recommended time.
Following these techniques will result in a professional, defect-free finish in your epoxy resin work.
Achieving a Smooth Surface with Epoxy Resin
To achieve a smooth surface with epoxy resin, follow these steps:
Prepare the surface by ensuring it is clean, dry, and free of dust or grease.
Carefully mix the epoxy resin and hardener in the correct ratio.
Apply the resin evenly using a brush or spatula.
Eliminate air bubbles with a gas torch.
Allow the resin to dry as per the manufacturer's instructions.
Sand the surface with fine sandpaper once dry for a smooth finish.
Following these steps diligently will result in a smooth, glossy surface with epoxy resin.
Tips for Perfect Epoxy Resin Leveling
To achieve perfect epoxy resin leveling, follow these tricks and precautions:
Ensure the surface is clean, smooth, and level before pouring the resin.
Use a thermometer to monitor the environment and resin temperature to prevent sudden changes affecting leveling.
Mix the resin with the catalyst as per manufacturer's recommendations.
Use a gas torch to remove trapped air bubbles.
Work in a draft-free environment to prevent surface irregularities.
Utilize a foam roller to evenly spread the resin for perfect leveling.
Safety: ARTSOAP is an Italian brand, a guarantee of high quality and safety. Our moulds are manufactured in compliance with all European safety standards. Durability: ARTSOAP silicone moulds are designed to last. You will be able to use them over and over again without losing the quality of the shape. Versatility: In addition to the creation of soaps, ARTSOAP moulds can be used for a variety of other applications, such as the creation of candles, gypsum and resins. The possibilities are endless! Let yourself be enchanted by our small flower mould. With mould size of 7.5 * 2.7 and end result size of 6.3 * 5.7 * 2.2 cm. Add a personal touch to your beauty products. You will be thrilled!
$6,95
Resin painting set "Flower Vase" Attention! If the resin (component A) is cloudy or with sediment, be sure to read this article: Link The set already includes everything you need to create a real masterpiece! Medium viscosity resin, metalic dyes and silicone mould in the form of a flower with diameters of 35 cm – now you no longer need to search for goods separately to assemble a set to create a flower vase 🙂 The set is also a great gift idea!
$82,95
HIGH-QUALITY SILICONE MOULD FOR HANDCRAFTS This flat Coaster Mould has a smooth interior and produces a beautiful coaster with a professional finish. Use our heat-resistant resin to make something that is not only functional. Dimensions: D.26 cm Height: 1cm If you’re using these moulds to make coasters, we recommend that you add a 3mm thick clear layer of Heat-Resistant resin first in your mould. Let it set and then add more resin with colour, ink, glitter, flowers etc. Once turned out (after 3-4 days), what was the bottom will be the top and heat-resistant up to 20oC! Remember that our Heat-Resistant resin needs between 72 h to achieve full cure, so don’t place a hot cup on it too early. DO-IT-YOURSELF. Material: Silicone, Colour: Semi-transparent; Reusable, Non-stick, Easy to use and clean. Warning: do not use aggressive solvents, High-quality moulds, heat-resistant: -40°C to + 210°C [-104° F to +410° F]
$13,20
3D – FINISH “Fast” Post-print coating for polishing and finishing 3D prints. Applied on any kind print, it makes the treated surface glossy, smooth and impact-resistant. Specifically developed to be used in 3D applications, it does not drip or cover small details, faithfully respecting all the shapes of the printing. Eliminates unevenness between the different layers; Glossy; Strengthens the mechanical resistance of the printing; Can be polished and painted. If you want to paint your printing according to your tastes, 3D Finish “Fast” can be coloured with colouring pastes and metal powders. Excellent adhesion and reinforcement on PLA, LAYWOOD, ABS. Fast and effective, it is an easy-to-apply solution to create finished items through 3D printing more quickly, improving their aesthetic uniformity and their impact strength. Thanks to its high mechanical resistance, it is also perfect to be used as a bonding agent between printings or to repair damaged 3D artefacts. We recommend to store the product in a dark, cool and dry place away from direct sunlight. The tools must be washed with IPA (isopropyl alcohol).
$16,49
Free shipping on orders over €199,00 
Shipping Tracking! 
Google
Facebook
