Parquet defect removal filler

Carbon Polish Black (250ml) is the defined product for polishing your carbon, dark or black surfaces. The aesthetic and economic value of the carbon product is high, and for this reason it is essential to treat the surface with specific and dedicated products, which enhance the beauty of the “carbon look”. It is important to avoid “generic" products that can spoil the work done, with insufficient gloss or even worse, fail to remove scratches. EASY TO APPLY AND REMOVE MISCIBLE WITH WATER ODOURLESS DOES NOT WHITEN PLASTIC PARTS DOES NOT CONTAIN SILICONES VERY LOW ENVIRONMENTAL IMPACT The carbon polishing paste Carbon Polish Pro Black has been developed in a black colour precisely to ensure a brilliant finish and without white dots, typical of generic abrasive pastes. It can therefore be used for all dark surfaces (especially resin).   Carbon Polish Pro Black is the specific paste for carbon; black colour prevents residues from remaining visible on surfaces after polishing. Thanks to the NAP (Nano Abrasive Particles) it is a 2 in 1 product; in fact it quickly removes scratches and defects from the surface and gives at the same time a deep shine like only a polish can do.   In addition, its Synthetic Polymers allow you to correct and fill all the imperfections on the surfaces of Resin and carbon fiber artifacts.   Eliminate scratches, defects and mirror shine with a single product!   Carbon Polish Pro Black carbon polishing paste can be used both on the painted carbon and directly on the epoxy resin that covers the carbon fibers. Unlike commercial Polishes, Carbon Polish Pro Black is 100% Made in Italy, born from over 50 years of tradition in polishing. It allows both the hobbyist and the professions to obtain performing results quickly and easily. Here are the simple steps to polish or eliminate blemishes from your carbon fibre surfaces: If you need to use glass paper to remove the deepest scratches, you can do so without hesitation. The polishing paste will then be able to remove the sanding marks and make the surface smooth and shiny. Here's how:- The polishing paste Carbon Polish Black can be used by hand with extreme simplicity, with the help of a microfiber cloth or a foam pad. Or it can be used with electric tools, such as a drill and flexible, equipped with a special shepherd and foam pad (8000-12000 rpm) or with a polisher (1000-2000 rpm both rotary and ro orbital) with foam pad or wool (also synthetic). The use of tools of this kind will speed up the maintenance and ensure optimal results in even faster times.   How to prepare the surface to be polished? Here are the tricks to make the most of NAP (Nano Abrasive Particles) technology:-   Removals defects and scratches from sanding Depending on the depth of the scratch/defect, start with abrasive papers grit 800-1000 (for deep scratches) or simply 3000-4000 (for light scratches), always tend the surface wetted with water (this will help to make the result homogeneous) Apply the polishing paste for carbon fiber on the surface and spread it with circular and more or less energetic movements depending on the defect you want to remove. Or by directly attaching the buffer of the polisher / hose. We recommend one / two drops of carbon polishing paste every 3-4 cm. You can apply it several times thanks to synthetic polymers, without risking consuming the carbon, until the result is perfect. Clean up simply with water and a clean cloth. Put on your sunglasses and enjoy the dazzling result! Surface renewal: The product is also suitable as a fast and effective tool to renew your precious carbon surfaces, which wear out with normal use or exposure to atmospheric agents. In this case, the process is even easier: it is sufficient to apply the paste on the surface (well cleaned) and roll it out with circular movements, or by directly applying the buffer of the polisher / flexible.   We recommend one / two drops of carbon polishing paste every 2-3 cm.   The carbon polishing paste Carbon Polish Pro Black has been developed in black colour precisely to ensure a brilliant finish and without white dots, typical of generic abrasive pastes, and can therefore be used for all dark surfaces (especially resin). The special formula is free of volatile silicones and is therefore not harmful to health; it can also be used in painting processes.

Material: High quality silicone, non-deformable and durable Reusable and non-stick: very easy to use and clean Versatile: Ideal for creating coasters and storing Advantages: Excellent durability: wear-resistant and retains its shape even after many uses Easy to clean: do not use aggressive solvents so as not to degrade the quality Ideal for those who love DIY and want to make creative and customised resin projects. Buy now and turn your ideas into cool designer-inspired items!

'-Tape ideal for masking and craft uses -Excellent resistance to water and solvents, great for outdoor use and decorating -Can withstand temperatures up to 200°F with a low tack adhesive for temporary use -Will stay in place up to 14 days in sunlight -Easy, clean removal, mostly used for drafting out areas for crafts, automotive work and home interiors -Supplied on 50 metre rolls with a choice of 25mm or 50mm widths

Uniform Application: Thanks to its toothed shape, the ResinPro spatula allows you to spread an even layer of resin, essential to obtain a smooth and homogeneous final result. Effective: The notched trowel is ideal for quickly coating large surfaces, such as tables or trays, ensuring that the resin arrives at all points without problems. Reduction of Defects: The use of the ResinPro spatula avoids the problem of surface irregularities due to uneven application of the amount of resin. Perfect for Self-levelling: It is the essential accessory to apply a homogeneous layer of self-levelling resin. The ResinPro Toothed Trowel allows you to apply the resin quickly and evenly, minimising defects and ensuring a high quality final result. The notched trowel is an indispensable product for those who want to create glossy and homogeneous resin surfaces add it to your cart!

"RAPHAEL" KIT for Pour Paint & Resin Art Create your unique painting with the "RAPHAEL" kit. Experience the countless mixtures and design the perfect artwork! The "RAPHAEL" KIT includes: TRANSPARENT RESIN FOR ARTWORK AND DIY 1.66 KG [3,65 LB] NEON PIGMENTS SET RECTANGULAR FRAME CANVAS 30*30cm WOODEN SPATULA * 5pcs NITRILE GLOVES INSTRUCTION "TIPS HOW TO WORK WITH EPOXY"   Transparent resin for artwork and DIY 1.66 KG [3,65 LB]. Transparent self-levelling UV-resistant epoxy system, which creates a hard and glossy protective layer for casting up to 1 cm [0,39”]. ART PRO, the epoxy resin for the artistic sector: thanks to its special formula and its dense structure, it allows you to create paintings with the "pour paint" and liquid paint technique. It does not leak out from the working surface, slowly reaching the corners of the frame. ART PRO preserves your original design and prevents any possible modification due to the casting of the resin: because of its special formula, the layers of colours do not expand and do not mix (unless you deliberately intervene), faithfully keeping with your creative idea! The surface is perfectly smooth and moisture-resistant. Solvent-free and odourless epoxy resin. Applications: - artworks, creation of art objects (paintings, panels, etc.) with the "fluid-art" (pour paint) technique (pouring up to 1 cm [0,39”]); - coating of surfaces, objects and furniture to add depth and brilliance to the colour; - create a 3D effect on prints, photos and images in general; - fixation of fillers (decorative elements, glass, stone, quartz, etc.) - creation of a perfectly transparent protective layer on your projects. The "ART-PRO" formula is specifically developed for coating in artistic applications. Compatible with colouring agents, powder pigments, alcohol-based and oil-based dyes, aerosol paints. Warning: the product is moisture sensitive, do not use on wet surfaces or with water-based dyes (e.g. Acrylics) Technical data: Usage ratio 100:66 (in weight) Pot Life (150 gr at 30°C) [0,33 lb at 86 F]: 1h20 ', Film (1 mm at 30°C) [0,03” at 86 F]: 6:00'. Full catalysis after 24 hours.   Neon Pigments Set. PIGMENTS WITH COLOURED BASE are perfect for decoupage, decoration and anything related to DIY. By simply adding them to resins, paints or varnishes, you can express your creativity with truly brilliant shades (neon effect!). WARNING: pigments do not glow in the dark, as they are not fluorescent.  

• Dry Sanding paper discs 150mm 6pcs. The kit includes the next grits by 1pcs - p80; p120; p150; p180; p320; p600 Transform your resin art projects with precision and finesse using our Dry Sanding Discs 150mm 6pcs Kit – the essential companion for epoxy resin artists. Crafted with meticulous attention to detail, this kit is designed to elevate your creative process and achieve flawless finishes. 💥Key features: •  Optimal Size: Each sanding disc measures 150mm in diameter, providing ample coverage for efficient and thorough sanding. •  Dry Sanding Capability: These discs are specifically engineered for dry sanding applications, ensuring a clean and dust-free work environment. The dry sanding process is ideal for epoxy resin artists seeking precise control and minimal mess. •  Premium Abrasive Material: The discs feature a high-quality abrasive surface, offering consistent and reliable performance. The abrasive material is carefully selected to cater to the unique needs of working with epoxy resin. •  Kit of 10: Our kit includes 10 sanding discs, providing you with an ample supply to tackle multiple projects. Whether you're a seasoned artist or just starting, this kit offers durability and value. •  Versatile Grit Options: The kit includes a range of grit sizes to suit various stages of your resin art project – from initial shaping to fine finishing. Achieve the desired smoothness and texture with ease. •  Epoxy Resin-Friendly: Engineered with the needs of epoxy resin artists in mind, these sanding discs are gentle on resin surfaces while ensuring efficient material removal. Perfect for refining edges, smoothing imperfections, and achieving a professional finish. Elevate your resin artistry with the precision and convenience of our Dry Sanding Discs 150mm 6pcs Kit. Unleash your creativity without compromise!

• Dry Sanding paper discs 150mm 10pcs. Transform your resin art projects with precision and finesse using our Dry Sanding Discs 150mm 10pcs Kit – the essential companion for epoxy resin artists. Crafted with meticulous attention to detail, this kit is designed to elevate your creative process and achieve flawless finishes. 💥Key features: •  Optimal Size: Each sanding paper disc measures 150mm in diameter, providing ample coverage for efficient and thorough sanding. •  Dry Sanding Capability: These discs are specifically engineered for dry sanding applications, ensuring a clean and dust-free work environment. The dry sanding process is ideal for epoxy resin artists seeking precise control and minimal mess. •  Premium Abrasive Material: The discs feature a high-quality abrasive surface, offering consistent and reliable performance. The abrasive material is carefully selected to cater to the unique needs of working with epoxy resin. •  Kit of 10: Our kit includes 10 sanding discs, providing you with an ample supply to tackle multiple projects. Whether you're a seasoned artist or just starting, this kit offers durability and value. •  Versatile Grit Options: The kit includes a range of grit sizes to suit various stages of your resin art project – from initial shaping to fine finishing. Achieve the desired smoothness and texture with ease. •  Epoxy Resin-Friendly: Engineered with the needs of epoxy resin artists in mind, these sanding discs are gentle on resin surfaces while ensuring efficient material removal. Perfect for refining edges, smoothing imperfections, and achieving a professional finish. Elevate your resin artistry with the precision and convenience of our Dry Sanding Discs 150mm 10pcs Kit. Unleash your creativity without compromise! ⌀ -150mm; 17-hole

“EPOXYWOOD” Epoxy Resin for Wood - Protective coating, Restoration, Reinforcement Protects, strengthens and polishes the wood, deeply penetrating thanks to its low viscosity. Solvent-free, it can be applied to any type of wood, including fibreglass and metal. Great for wooden, fibreglass and metal surfaces. In addition to surface protection, it enhances the wood grain and provides a pleasant aesthetic effect. Filler applicable with additions of 2/3 of glass beads (available in our shop) Colour: STRAW-YELLOW, not suitable for high-thickness castings (in such cases, we recommend ResinPro Transparent Epoxy Resin) Solvent-free structural epoxy system formulated for the construction, the protection and the restoration of fibreglass, timber and many other substrates. Its properties of penetration, adhesion and weather-resistance make “EPOXYWOOD” essential for the maintenance and protection of surfaces. With “EPOXYWOOD” you can have high strength bonding, surface protection and waterproofing of the hull. Wood treated with “EPOXYWOOD” becomes completely waterproof and reinforced while maintaining its characteristics of flexibility and resistance. Surface preparation: Before applying “EPOXYWOOD”, ensure that the surface to be treated is perfectly dry and moisture-free. The wood to be treated must always be clean and free of oils or other solvents. We recommend to sand the surface before application.