Resin composition for personal gifts

"Wave-Pro" - Pigment Additive for Sea Wave Effect in Epoxy Resin Art

Create your personalized Sea Wave Effect!  WAVE-PRO is a non-toxic powder that reacts with wet epoxy resins by repelling itself away, thereby stimulating movement in concentric outward circles and waves. Creates cells and waves in resin art Safe & user-friendly Odourless Non-toxic & non-flammable Zero-VOC formula with no harsh chemical ingredients, solvents or alcohol-based ink WAVE-PRO can be used along with our range of colours or metallic pigments. Please Note that WAVE-PRO was developed and tested with our proprietary artwork resins. Ideal for Ocean Resin Art   How to use: How to work with Wave Pro - the ideal tool to create the natural sea waves effect! These instructions imply the presence of a "sea" background made of epoxy resin on your board / canvas (it can be done as acrylic paints, and just filled it with transparent resin on top, or you can make it entirely from coloured resin). The hardened "sea" background made of epoxy resin makes it possible to remove non-produced waves in case of failure. We mix the epoxy resin in the proportions indicated in the instructions (the volume depends on the scale of the work). In a cup, mix the resin and Wave Pro additive using the ratio: 3-4 teaspoons of resin and 1/2 teaspoon of Wave Pro). It is important to mix thoroughly and quickly so that the powder dissolves and turns from a pale white to a rich white. Let the mixture rest for 50-70 minutes, occasionally stirring it in a cup. Your main goal is to get a very thick mixture after the indicated time, since this is the perfect consistency for it to be blown with a blow dryer. Mix the newly obtained resin, and use it to make a transparent layer on top of your "sea" background (the key point is that without a liquid transparent layer, the wave effect will not work!). Pour a thin stream of white thick mixture onto this transparent epoxy layer and, holding the blow dryer at a 30 ° angle, blow the wave. Linger only at the beginning of the process, because the resin is thick, and the blow dryer needs to "soften" it, but as you see that the wave has gone, then immediately move along the entire wavelength without stopping. Go through the burner and wait for the resin to completely cure. Once cured, you will have your real sea :) We recommend to use the product with our TRANSPARENT EPOXY RESIN (low viscosity) https://resin-pro.co.uk/product/transparent-epoxy-resin-320-gr/ https://www.instagram.com/p/B0twAR1gDaE/?igshid=nvej64p9oa69

$4,84

Rectangular Silicone Cutting Board Mould for Resin Creations – Reusable

Professional model “Rectangular Cutting Board” in high quality silicone for creations in resin. Excellent for creating personalized, artistic and decorative cutting boards. Ideal decor for the home, this product can be reused over the years. If you’re using these moulds to make coasters, we recommend that you add a 3mm thick clear layer of Heat-Resistant resin first in your mould. Let it set and then add more resin with colour, ink, glitter, flowers etc. Once turned out (after 3-4 days), what was the bottom will be the top and heat-resistant up to 200C! Remember that our Heat-Resistant resin needs up to 72 hours to achieve full cure, so don’t place a hot cup on it too early. DO-IT-YOURSELF. Material: Silicone, Colour: Semi-transparent; Reusable, Non-stick, Easy to use and clean.   Warning: do not use aggressive solvents, High-quality moulds, heat-resistant: -40°C to + 210°C [-104° F to +410° F] Attention! Remove the product from the mold no later than 12 hours after pouring the resin. Otherwise, there is a chance of local adhesion of the resin to the mold.

$8,95

"One–2–One" - Epoxy Resin for Handcraft, Medium Viscosity, 1:1 Mixing Ratio

💥About “"ONE-2-ONE" - Epoxy Resin For Handcraft: Introducing our premium Non-Toxic Epoxy Resin, meticulously crafted for your creative ventures. This 11-gram quantity (500 ml) offers a perfect balance between versatility and precision, making it an ideal choice for various applications. Perfect to effortlessly design works of art and jewellery. 1:1 ratio for quick and error-free creations, non-toxic, transparent and durable. 💥 Best choice for: Artistic Creations: Ideal for creating stunning resin art pieces, jewellery, and decorative items. DIY Projects: Perfect for a wide range of DIY projects, including coating surfaces, encapsulating objects, and crafting personalized gifts. Crafting and Modelling: Explore its versatility in crafting, modelling, and various creative pursuits. 💥Key features: ✔️ Non-Toxic Formulation: Our epoxy resin is carefully formulated to ensure a safe and non-toxic experience for artists and creators. Enjoy peace of mind as you bring your ideas to life. ✔️ Versatile Applications: Whether you're a seasoned artist, DIY enthusiast, or crafting hobbyist, this epoxy resin is your go-to solution. Perfect for encapsulating, coating, casting, and more. ✔️ Easy to Use: The user-friendly nature of this epoxy resin makes it suitable for both beginners and experienced craftsmen. Achieve professional-grade results with ease. ✔️ Crystal Clear Finish: Experience the brilliance of crystal-clear finishes in your projects. The resin dries to a transparent and glossy surface, enhancing the visual appeal of your creations. ✔️ Reliable Performance: Our epoxy resin offers excellent adhesion, durability, and resistance to yellowing over time, ensuring your projects withstand the test of time.  

$21,49

3 Layer Fruit Plate Silicone Mold Kit – Set of 3 for Resin Crafts and Trays

HIGH-QUALITY SILICONE MOULD FOR HANDCRAFTS This flat Coaster Mould has a smooth interior and produces a beautiful coaster with a professional finish. Use our heat-resistant resin to make something that is not only functional but also ideal for making three-tier fruit and dessert trays, coasters, decorative elements and home and office decorations. This product can be reused over the years. The Set includes: Silicone molds: D. 155 mm – 1 pcs → 6.1 in – 1 pc D. 205 mm – 1 pcs → 8.1 in – 1 pc D. 255 mm – 1 pcs → 10.0 in – 1 pc Support rod (by variation): 110 mm – 2 pcs → 4.3 in – 2 pcs 122 mm x P. 47 – 1 pcs → 4.8 in x P. 1.9 – 1 pc If you're using these moulds to make coasters, we recommend that you add a 3mm thick clear layer of Heat-Resistant resin first in your mould. Let it set and then add more resin with colour, ink, glitter, flowers etc. Once turned out (after 3-4 days), what was the bottom will be the top and heat-resistant up to 200C! Remember that our Heat-Resistant resin needs up to 72 hours to achieve full cure, so don't place a hot cup on it too early. DO-IT-YOURSELF. Material: Silicone, Colour: Semi-transparent; Reusable, Non-stick, Easy to use and clean.   Warning: do not use aggressive solvents, High-quality moulds, heat-resistant: -40°C to + 210°C [-104° F to +410° F]  

$17,49

Resin Formulation for Personalized Gifts

Transparent epoxy resins are perfect for crafting one-of-a-kind personalized gifts. The composition of resin used for creating personal gifts typically involves a mix of epoxy or polyurethane resins with hardeners to ensure proper solidification. It is crucial to meticulously follow the mixing and curing guidelines to achieve the best results. These resins provide a sleek and glossy surface, ideal for crafting jewelry, ornaments, or custom decorative pieces. Before embarking on your project, ensure you have all the necessary tools and work in a well-ventilated space.

Resin Jewelry Making Guide

Crafting resin jewelry is a captivating and artistic process. To begin, gather transparent epoxy resin, resin colors, jewelry molds, gloves, and a safety mask. Here are the main steps to create resin jewelry:

• Prepare the resin following the manufacturer's instructions and add your chosen colors.
• Pour the resin into the molds and incorporate any desired inclusions like dried flowers or glitter.
• Allow the resin to dry for the specified duration.
• Once hardened, carefully remove the jewelry from the molds and refine any edges if needed.
• Finally, add jewelry components such as rings, hooks, or chains.

By following these steps, you can craft distinctive and personalized jewelry using resin.

DIY Epoxy Resin Gift Ideas

Exploring do-it-yourself gift ideas with epoxy resin can offer a creative and personalized touch. Here are some suggestions to consider:

• 1. Unique jewelry: Create necklaces, earrings, or bracelets by embedding dried flowers, leaves, or glitter into the resin.
• 2. Customized coasters: Design transparent coasters with inclusions of flowers, leaves, or magazine pages.
• 3. Artistic panels: Pour resin onto a base to craft three-dimensional panels with embedded objects.
• 4. Custom keychains: Incorporate photos, small objects, or glitter into resin to produce original keychains.
• 5. Home accessories: Craft curtain pendants, drawer handles, or unique ashtrays with resin.

Experiment and personalize your creations to make each gift distinctive and special.

Tailored Epoxy Resin Projects

Creating bespoke projects with epoxy resin opens up endless creative opportunities. Epoxy resin is a versatile and robust material, perfect for crafting unique and enduring items. With epoxy resin, you can design tables, countertops, jewelry, paintings, and more, customizing shapes, colors, and finishes. The transparency and brilliance of epoxy resin add a contemporary and sophisticated touch to any do-it-yourself project. It is vital to diligently adhere to the mixing and application instructions for optimal and long-lasting outcomes. Unleash your creativity and explore innovative projects using epoxy resin.

"Uv-Creation" - Fast Acrylic Resin for Jewelry & Art, UV Cure in 3 Minutes

💥About "UV-CREATION" - Fast Acrylic Resin - 3 Minutes: Introducing our UV Resin, a versatile and high-quality solution for all your hand crafting needs. UV resin is an acrylic gel that dries under the influence of the rays of a UV torch or UV lamp in a short time - 3-5 minutes.  The difference between this resin and epoxy resin is in its one–component nature (it does not require mixing two different components; it is ready for use), in a small filling thickness (applied in thin layers 3 mm thick) and in a high curing rate (only 3-5 minutes under UV rays). 💥 Bestseller for: Artistic Creations: Ideal for creating stunning resin art pieces, jewellery, and decorative items. DIY Projects: Perfect for a wide range of DIY projects, including encapsulating objects, and crafting personalized gifts. Crafting and Modelling: Explore its versatility in crafting, modelling, and various creative pursuits. 💥Key features: ✔️ Fast curing time: No more waiting: Create instantly - UV-CREATION is your ultimate crafting companion for fast, hassle-free creations. Say goodbye to long catalysis times and welcome instant results! Only a couple of minutes under uv-lamp and your creation is ready! ✔️ Maximum hardness, maximum shine: Our new formula guarantees first-rate hardness and a clear, glossy finish that is second to none. ✔️ Time-efficient formula: UV-CREATION's innovative formula ensures surfaces are no longer sticky after curing, saving time and material. ✔️ Non toxic: Experience the joy of creating in freedom. Our acrylic and non-toxic materials ensure that your jewellery and decorative items are safe and spectacular. -The curing time depends on the thickness of the layer or the amount of dye added to the gel. You can use lamps with a power of 3w, 9w and 36w. The main thing is that the wavelength of the lamp is 365nm -405nm. -The recommended application layer is 3 mm. You can apply 2-3 layers of 3 mm, drying each layer well with UV light before applying the next one. It is not recommended to use the product for castings with a thickness of more than 3 mm in one approach. -UV resin can be painted with dry pigments and liquid pigments, glitter and other decorative elements can be added. Alcohol ink is not suitable for UV resin staining.

$12,65

"Screw Fasteners" – Set of 100, 7mm Metal Screws for Resin Crafts

Screw fasteners (100 pcs) are a great option for creating handmade gifts, and for pendants and earrings made from epoxy resin. Screw size: 7mm

$4,95

"Flower Set Moulds" – Silicone Moulds for Resin Stands and Coasters, 3 Pieces

Material: High quality silicone Colour: White Sizes: Supports: 4.7″ x 0.3″ (3 pcs.) Advantages: Flexibility and versatility: Suitable for a wide range of applications, including coasters and art decorations. Heat resistance: Resistant to temperatures from -76°F to 446°F, ideal for various methods and materials. Easy Storage: Easy to store and takes up little space. Easy to clean: Easy to clean and does not change shape over time. Easy to extract: easily remove the finished product without damaging it. Usage: Ideal for creating custom coasters, this set is perfect for those who want to add a personal and creative touch to their home or office. Also great for unique handmade gifts. With these shapes, you can create stylish and functional stands, adding a touch of style to your creations and the environment. Buy them today and start creating!

$10,23

Rectangular Soap Mould – 9.1x8.3in Silicone Mold for Soap Making

✅Elegant and practical design: Rectangular soap mold with a total size of 9.1 x 8.3 x 0.8'' and soap 3.1 x 2.1 x 0.8'' for perfect and uniform creations. ✅ Unlimited creativity: Personalize the soap with flavors and dyes, perfect for personal use, gifts or sale. ✅ Safety and quality: produced by the Italian brand ART SOAP, which complies with European safety standards. ✅ Durable and versatile: Durable for multiple uses, ideal for soaps, candles, chalks and resins. ✅ Easy to use and maintain: Easy to clean thanks to the non-stick surface for quick and easy extraction of creations. Unleash your creativity and make a natural handmade soap that stands out with the silicone molds of the ARTSOAP line. Ideal for creating personalized and unique soap bars, these shapes allow you to express your style and turn your ideas into real works of art. Easy to use and maintain: The mold is easy to use and clean due to its non-stick and flexible surface. Deleting your creations will be simple and easy.

$7,49