ResinPro silicone oil is composed of the highest quality elements and guarantees exceptional durability for your moulds! It is a product designed for artists who love to reproduce resin objects with silicone moulds and who want to protect their precious moulds from wear and tear. In fact, silicone moulds can often become damaged after a few uses: the silicone oil, regularly applied on the surfaces of silicone moulds, allows you to maintain the softness and anti-adhesive capacity of the moulds, resulting in them being unchanged and prolonged over time. Silicone oil also has many artistic applications: adding a few drops to a mass of coloured resin enable you to obtain special effects at the time of casting! In addition, silicone oil can also be used in pouring or fluid painting techniques with acrylic dyes to obtain the beautiful wet effect on your canvases ! ResinPro silicone oil is composed of the highest quality elements and guarantees exceptional durability for your moulds! It is a product designed for artists who love to reproduce resin objects with silicone moulds and who want to protect their precious moulds from wear and tear. In fact, silicone moulds can often become damaged after a few uses: the silicone oil, regularly applied on the surfaces of silicone moulds, allows you to maintain the softness and anti-adhesive capacity of the moulds, resulting in them being unchanged and prolonged over time. Silicone oil also has many artistic applications: adding a few drops to a mass of coloured resin enable you to obtain special effects at the time of casting! In addition, silicone oil can also be used in pouring or fluid painting techniques with acrylic dyes to obtain the beautiful wet effect on your canvases !
$7,49
SILICONE MOULD FOR HANDCRAFTS. Easy to use, highly polished and perfect for creating beautiful jewellery or decorations. Suitable to be used with soap, plaster, resin, ice, ceramic, clay, wax and other casting materials proper for DIY. Moulds for objects, jewels and chocolate. DO-IT-YOURSELF. Material: Silicone, Colour: Semi-transparent; Reusable, non-stick, easy to use and clean. Measures of each mould: 1.5 CM [0,59"], 1 CM [0,39"], 2.5 CM [0,98"] Warning: do not use aggressive solvents, High-quality moulds, heat- resistant: -40°C to + 210°C [-104° F to +410° F] Attention! Remove the product from the mold no later than 12 hours after pouring the resin. Otherwise, there is a chance of local adhesion of the resin to the mold.
$7,95
Type of manual technique: Creation Material: Silicone Color: Semi-transparent; Reusable, non-stick, easy to use and clean. Measurements of each mold: 2 x 1.4 in Warning: do not use aggressive solvents High quality molds, temperature rating: -40 centigrade to + 210 centigrade.
$6,05
Professional model “Rectangular Cutting Board” in high quality silicone for creations in resin. Excellent for creating personalized, artistic and decorative cutting boards. Ideal decor for the home, this product can be reused over the years. If you’re using these moulds to make coasters, we recommend that you add a 3mm thick clear layer of Heat-Resistant resin first in your mould. Let it set and then add more resin with colour, ink, glitter, flowers etc. Once turned out (after 3-4 days), what was the bottom will be the top and heat-resistant up to 200C! Remember that our Heat-Resistant resin needs up to 72 hours to achieve full cure, so don’t place a hot cup on it too early. DO-IT-YOURSELF. Material: Silicone, Colour: Semi-transparent; Reusable, Non-stick, Easy to use and clean. Warning: do not use aggressive solvents, High-quality moulds, heat-resistant: -40°C to + 210°C [-104° F to +410° F] Attention! Remove the product from the mold no later than 12 hours after pouring the resin. Otherwise, there is a chance of local adhesion of the resin to the mold.
$8,95
How to Prevent Bubbles When Drying Memory Boxes with Epoxy Resin
Epoxy resins, such as "memory box," are commonly used in creating art pieces and DIY jewelry. To ensure a bubble-free finish during the drying process, it is crucial to follow these steps meticulously. Begin by thoroughly mixing the epoxy resin with the hardener as per the manufacturer's guidelines. Slowly pour the mixture into the memory box without sudden movements that may introduce air bubbles. To remove any existing bubbles, lightly pass a gas torch over the surface to bring them to the top. Finally, cover the memory box with a lid to shield it from dust and particles while it cures.
Techniques for Drying Epoxy Resin Without Bubbles
To prevent bubbles from forming during the drying of epoxy resins, it is vital to adhere to specific techniques. Firstly, ensure a thorough mix of the resin and hardener to prevent air bubble formation. Slowly and evenly pour the resin onto the desired surface. To eliminate any bubbles, you can gently heat the resin with a propane torch to bring the bubbles to the surface or use a heat gun to remove them. Allow the resin to dry in a space free from drafts, covering it to protect it from dust and dirt during the curing process.
Tips for Achieving Bubble-Free Resin Prints
To create flawless resin prints without bubbles, follow these tips
Maintain a clean, dust-free work area.
Use high-quality resins suitable for your 3D printer.
Thoroughly mix the resin to prevent irregularities.
Employ low-speed agitation to minimize bubble formation during mixing.
Position the printer in a controlled temperature and humidity environment.
Utilize the preheating option in the printer to reduce resin viscosity.
Print at appropriate speeds to prevent air bubble accumulation.
By incorporating these tips, you can produce impeccable resin prints without any defects.
Bubble-Free Resin Pigment Application Method
To prevent bubbles when using pigments with resin, it is essential to follow the correct method. Here are steps to consider:
Mix pigments slowly to avoid excessive air incorporation.
Use pigments specifically designed for epoxy or polyurethane resin.
Degas the resin before adding pigments using a vacuum chamber to remove air bubbles.
Apply pigmented resin in thin layers to minimize bubble entrapment.
By carefully following these steps, you can achieve flawless bubble-free resin works.
SILICONE MOLD FOR HANDCRAFTS. Easy to use, highly polished and perfect for creating beautiful jewellery or decorations. Suitable to be used with soap, plaster, resin, ice, ceramic, clay, wax and other casting materials proper for DIY. Molds for objects, jewels and chocolate. DO-IT-YOURSELF. Material: Silicone, Colour: Semi-transparent; Reusable, non-stick, easy to use and clean. Measures of each mould: 5.0 x 3.5 CM [1,96" x 1,37"] Warning: do not use aggressive solvents, High-quality molds, heat- resistant: -40°C to + 210°C [-104° F to +410° F]
$6,95
Soft silicone mould for resins. Mould made with professional silicone and absolutely free of imperfections. Non-deformable mould, of great resistance and durability. Type of manual technique: creation of jewelry box. Material: Silicone Color: Semi-Transparent; Reusable, non-stick, easy to use and clean. Glass measures: 11 x 11 CM / H. 6. 5 CM Caution: do not use aggressive solvents for cleaning. High quality moulds, thermal resistance: -40 + 210 centigrade. Attention! Remove the product from the mold no later than 12 hours after pouring the resin. Otherwise, there is a chance of local adhesion of the resin to the mold. Copyright © Resin Pro Srl. The reproduction (total or partial) of the work by any means made and its making available to third parties, either free of charge or for a fee is prohibited.
$7,95
SILICONE MOULD FOR HANDCRAFTS. Easy to use, highly polished and perfect for creating beautiful jewellery or decorations. Suitable to be used with soap, plaster, resin, ice, ceramic, clay, wax and other casting materials proper for DIY. Moulds for objects, jewels and chocolate. DO-IT-YOURSELF. Material: Silicone, Colour: Semi-transparent; Reusable, non-stick, easy to use and clean. Measures of each mould: 1,10” x 0,78” Warning: do not use aggressive solvents, High-quality moulds, heat- resistant: -40°C to + 210°C [-104° F to +410° F] Attention! Remove the product from the mold no later than 12 hours after pouring the resin. Otherwise, there is a chance of local adhesion of the resin to the mold.
$7,95
Silicone mold in the form of ice cream+free 4 sticks The ice moulds can withstand temperatures from -40 to 230 degrees Celsius and are safe for use in the oven, refrigerator, microwave and dishwasher. You can use them over and over again when you need them. Size: 9.8х5.9 inches (overall shape size) H 3.9 x W 2.2-2.3 x T 0.8 in (Ice cream shape) 1.3 in (stick size) Material:Silicone Colour:White Warning: do not use aggressive solvents. Attention! Remove the product from the mold no later than 12 hours after pouring the resin. Otherwise, there is a chance of local adhesion of the resin to the mold.
$17,95
Free shipping on orders over €199,00 
Shipping Tracking! 
Google
Facebook
