Shower Tray Acrylic Restoration Kit Price

"Tray" - Create Your Own Resin Tray Kit with Epoxy, Mould, Handles, and Dyes

Creative Kit: Create your own resin tray! KIT INSTRUCTIONS This kit contains: 1.66 kg of epoxy resin Silicone mould "tray" + handles 5 dense dyes Spread out the plastic tarpaulin to protect the work surface. Make sure that the silicone mould is clean and all materials are at hand. Do not forget to wear disposable gloves and follow the safety instructions. Mix the epoxy resin according to the mixing ratio Art Pro 100: 66 – by weight) – 180 g A and 119 g B-for a filling thickness of 5 mm. Carefully weigh and mix both components for 3 minutes, making sure that all sides and bottom of the mixing container are included for effective mixing. Let the mixture stand for 2-3 minutes. Divide the resulting resin into separate containers for each colour you are going to use. Add resin-specific dyes to each container to get the desired shades. Mix thoroughly. Put the colours in one large container without mixing them, allowing them to stack on top of each other. Pour this mixture in layers into a mould for a dynamic abstract effect. In addition, you can pour each colour into different places of the mould according to your design concept. After 24 hours, you can remove the resin tray. After another 12-24 hours (the resin reaches full strength), you can make your tray workable by using the screws included in the kit to attach the tray handles. Drill the holes in the tray, then secure the handles with screws. Geodetic effect- To get the geode effect when casting, use the layering technique. Divide the mixed resin into separate containers for each colour you are going to use + one part with transparent resin and one white. Start by pouring clear resin into the center of the mould. Then alternate layers of white and transparent resin with coloured resin, allowing them to spread naturally. Finish by adding the last layer of transparent resin for a beautiful 3D effect. Let it harden to reveal a stunning geodesic-inspired design. Other ideas: Ocean Art Resin Tray: Capture the beauty of the ocean using different shades of blue and white resin, adding a few shells or a small starfish for an authentic nautical feel. Real Pressed Flowers: Add real dried flowers or leaves to the resin to create a natural and timeless look. Gold leaf Accents: Use a gold or metal sheet to add a touch of luxury to your tray.

$78,49

3 Layer Fruit Plate Silicone Mold Kit – Set of 3 for Resin Crafts and Trays

HIGH-QUALITY SILICONE MOULD FOR HANDCRAFTS This flat Coaster Mould has a smooth interior and produces a beautiful coaster with a professional finish. Use our heat-resistant resin to make something that is not only functional but also ideal for making three-tier fruit and dessert trays, coasters, decorative elements and home and office decorations. This product can be reused over the years. The Set includes: Silicone molds: D. 155 mm – 1 pcs → 6.1 in – 1 pc D. 205 mm – 1 pcs → 8.1 in – 1 pc D. 255 mm – 1 pcs → 10.0 in – 1 pc Support rod (by variation): 110 mm – 2 pcs → 4.3 in – 2 pcs 122 mm x P. 47 – 1 pcs → 4.8 in x P. 1.9 – 1 pc If you're using these moulds to make coasters, we recommend that you add a 3mm thick clear layer of Heat-Resistant resin first in your mould. Let it set and then add more resin with colour, ink, glitter, flowers etc. Once turned out (after 3-4 days), what was the bottom will be the top and heat-resistant up to 200C! Remember that our Heat-Resistant resin needs up to 72 hours to achieve full cure, so don't place a hot cup on it too early. DO-IT-YOURSELF. Material: Silicone, Colour: Semi-transparent; Reusable, Non-stick, Easy to use and clean.   Warning: do not use aggressive solvents, High-quality moulds, heat-resistant: -40°C to + 210°C [-104° F to +410° F]  

$17,49

"Tray" - Silicone Mould for Resin, 30.5x17cm

Professional mold "tray" composed of high quality silicone for resin creations. Excellent for making coasters, decorative elements, and home or office decor, this product can be reused over the years. Size: 30.5 cm x 17 cm Thickness:1 cm Color: white The mold is characterized by flexibility and versatility of use. Resistant to temperatures ranging from -60° C to +230° C. Ideal for professional use in the decorative world. Advantage: * Easy storage * Easy to wash, does not change the shape for long time. * Easy extraction Please, pay your attention! Handles are not included.   Copyright © Resin Pro Srl. The reproduction (total or partial) of the work by any means made and its making available to third parties, either free of charge or for a fee is prohibited.

$11,66

Handles for Trays, Bronze Effect – 2 Pieces, 150x30x10mm

The handles for trays are made following an elegant design that characterizes as a versatile accessory suitable also for drawers and furniture of various kinds. Size: 150 mm x 30 mm x D. 10 mm Color: bronze effect Ideal for epoxy resin trays.

$7,49

Acrylic Shower Tray Restoration Kit Price

An acrylic shower tray restoration kit offers a cost-effective solution to rejuvenate worn or damaged surfaces. Prices for these kits vary depending on the brand, quality, and quantity of products included. Typically, acrylic shower tray restoration kits start at around $30 and can go up to over $100 for more comprehensive and professional options. Before purchasing a kit, it is important to carefully review the manufacturer's instructions and assess whether you have the necessary skills to effectively restore the acrylic shower tray.

Acrylic Shower Tray Restoration Kit

The acrylic shower tray restoration kit is a specialized product designed to repair and refresh damaged surfaces. These kits usually contain all the necessary materials such as epoxy resins, primers, colors, and other components required for the restoration process. With the acrylic shower tray restoration kit, you can eliminate scratches, cracks, and other signs of wear, ensuring a renewed and durable appearance for your shower tray. It is crucial to follow the provided instructions diligently to achieve optimal and long-lasting results.

To restore an acrylic shower tray, follow these steps carefully

• 1. Cleaning: Remove soap scum and limescale with a non-abrasive cleaner.
• 2. Sanding: Gently sand the damaged surface with fine-grit sandpaper.
• 3. Repair: Apply an acrylic resin to fill any scratches or cracks.
• 4. Leveling: Level the surface with a spatula and increasingly finer sandpaper.
• 5. Finishing: Apply a clear acrylic coating to protect and maintain the gloss.
• 6. Drying: Allow it to dry for the recommended time before using the shower tray.

By following these steps diligently, you can effectively restore a damaged acrylic shower tray.

Resin Shower Tray Restoration Products

To restore a resin shower tray, specific products are available to ensure an effective and long-lasting outcome. Start by using a resin repair kit, which typically includes epoxy resin, catalyst, sandpaper, and detailed instructions. Additionally, consider using a resin gel coat to restore the surface of the shower tray, providing resistance and brilliance. It is essential to carefully follow the manufacturer's instructions and thoroughly clean the surface before application. With the right products and correct procedure, your resin shower tray will shine like new again.

DIY Shower Tray Restoration Tutorial

Restoring your shower tray as a DIY project can be a simple and rewarding task if you follow some key steps. Here's how to proceed:

• 1. Cleaning: Remove old sealants and dirt residues with a specific detergent.
• 2. Repair: Use epoxy resins to seal cracks or dents.
• 3. Sanding: Sand the surface to make the shower tray smooth and even.
• 4. Coating: Apply a layer of epoxy resin or silicone for waterproofing and durability.
• 5. Drying: Allow the shower tray to dry completely before using it again.

By carefully following these steps, you can achieve a satisfactory result in your DIY shower tray restoration.

Round Metal Tray Holder, Gold – 27cm Diameter for Custom Epoxy Resin Trays

The metal tray holder is made following an elegant design that characterizes a versatile accessory suitable to be used also on drawers and furniture of various kinds. Sizes: D.27 cm Colour: Gold Ideal for making your own custom epoxy resin trays!

$14,19

"Uv-Creation" - Fast Acrylic Resin for Jewelry & Art, UV Cure in 3 Minutes

💥About "UV-CREATION" - Fast Acrylic Resin - 3 Minutes: Introducing our UV Resin, a versatile and high-quality solution for all your hand crafting needs. UV resin is an acrylic gel that dries under the influence of the rays of a UV torch or UV lamp in a short time - 3-5 minutes.  The difference between this resin and epoxy resin is in its one–component nature (it does not require mixing two different components; it is ready for use), in a small filling thickness (applied in thin layers 3 mm thick) and in a high curing rate (only 3-5 minutes under UV rays). 💥 Bestseller for: Artistic Creations: Ideal for creating stunning resin art pieces, jewellery, and decorative items. DIY Projects: Perfect for a wide range of DIY projects, including encapsulating objects, and crafting personalized gifts. Crafting and Modelling: Explore its versatility in crafting, modelling, and various creative pursuits. 💥Key features: ✔️ Fast curing time: No more waiting: Create instantly - UV-CREATION is your ultimate crafting companion for fast, hassle-free creations. Say goodbye to long catalysis times and welcome instant results! Only a couple of minutes under uv-lamp and your creation is ready! ✔️ Maximum hardness, maximum shine: Our new formula guarantees first-rate hardness and a clear, glossy finish that is second to none. ✔️ Time-efficient formula: UV-CREATION's innovative formula ensures surfaces are no longer sticky after curing, saving time and material. ✔️ Non toxic: Experience the joy of creating in freedom. Our acrylic and non-toxic materials ensure that your jewellery and decorative items are safe and spectacular. -The curing time depends on the thickness of the layer or the amount of dye added to the gel. You can use lamps with a power of 3w, 9w and 36w. The main thing is that the wavelength of the lamp is 365nm -405nm. -The recommended application layer is 3 mm. You can apply 2-3 layers of 3 mm, drying each layer well with UV light before applying the next one. It is not recommended to use the product for castings with a thickness of more than 3 mm in one approach. -UV resin can be painted with dry pigments and liquid pigments, glitter and other decorative elements can be added. Alcohol ink is not suitable for UV resin staining.

$12,65

"Tray" Silicone Mould Tray with Metal Holder Set

SET + Silicone mould tray + Metal holder Professional mold “tray” composed of high quality silicone for resin creations. Excellent for making coasters, decorative elements, and home or office decor, this product can be reused over the years. Ideal for making your own custom epoxy resin trays! The mold is characterized by flexibility and versatility of use. Resistant to temperatures ranging from -60° C to +230° C. Ideal for professional use in the decorative world. Advantage: * Easy storage * Easy to wash, does not change the shape for long time. * Easy extraction [xyz-ips snippet="TRUSTPILOT-WIDGET"]

$21,95

Metal Tray Holder – Gold, 23x23x32cm

The metal tray holder is made following an elegant design that characterizes a versatile accessory suitable to be used also on drawers and furniture of various kinds. Sizes: 23 x 23 x 32 cm Colour: Gold Ideal for making your own custom epoxy resin trays!

$14,19