Keeping painted iron glossy

"Wave-Pro" - Pigment Additive for Sea Wave Effect in Epoxy Resin Art

Create your personalized Sea Wave Effect!  WAVE-PRO is a non-toxic powder that reacts with wet epoxy resins by repelling itself away, thereby stimulating movement in concentric outward circles and waves. Creates cells and waves in resin art Safe & user-friendly Odourless Non-toxic & non-flammable Zero-VOC formula with no harsh chemical ingredients, solvents or alcohol-based ink WAVE-PRO can be used along with our range of colours or metallic pigments. Please Note that WAVE-PRO was developed and tested with our proprietary artwork resins. Ideal for Ocean Resin Art   How to use: How to work with Wave Pro - the ideal tool to create the natural sea waves effect! These instructions imply the presence of a "sea" background made of epoxy resin on your board / canvas (it can be done as acrylic paints, and just filled it with transparent resin on top, or you can make it entirely from coloured resin). The hardened "sea" background made of epoxy resin makes it possible to remove non-produced waves in case of failure. We mix the epoxy resin in the proportions indicated in the instructions (the volume depends on the scale of the work). In a cup, mix the resin and Wave Pro additive using the ratio: 3-4 teaspoons of resin and 1/2 teaspoon of Wave Pro). It is important to mix thoroughly and quickly so that the powder dissolves and turns from a pale white to a rich white. Let the mixture rest for 50-70 minutes, occasionally stirring it in a cup. Your main goal is to get a very thick mixture after the indicated time, since this is the perfect consistency for it to be blown with a blow dryer. Mix the newly obtained resin, and use it to make a transparent layer on top of your "sea" background (the key point is that without a liquid transparent layer, the wave effect will not work!). Pour a thin stream of white thick mixture onto this transparent epoxy layer and, holding the blow dryer at a 30 ° angle, blow the wave. Linger only at the beginning of the process, because the resin is thick, and the blow dryer needs to "soften" it, but as you see that the wave has gone, then immediately move along the entire wavelength without stopping. Go through the burner and wait for the resin to completely cure. Once cured, you will have your real sea :) We recommend to use the product with our TRANSPARENT EPOXY RESIN (low viscosity) https://resin-pro.co.uk/product/transparent-epoxy-resin-320-gr/ https://www.instagram.com/p/B0twAR1gDaE/?igshid=nvej64p9oa69

$4,84

Gilding – Liquid Bronze "Divolo Porporina" Paint, 1.7oz

Golden Leaf is a particular paint based on metallic purples, dispersed in a solution of petroleum resin and white spirit. Once spread, the product forms a highly effective metallized film. The product can be used for finishes in the field of decoration and hobby, it is resistant and very stable when used on substrates intended for internal use. To apply this paint, just put the desired amount on a brush with which you will slowly massage the work surface. Drying time: 24 h   The Golden Leaf series is available in 7 shades of different colors: Oro Ricco, Oro Pallido, Oro Ricco Pallido, Oro Zecchino, Oro Ducato, Rame, Silver.

$10,23

“Magic Drops” - Mega Cells Effect Additive for Resin Art, 0.5oz

Magic Drops MEGA to create cells, lacing & blooming effects for Abstract Resin Art 15 ml [0,5 oz]   Magic Drops is a one-component polymeric liquid that reacts with wet epoxy resins by repelling itself away, thereby stimulating movement in concentric outward circles. It is not paint or resin and will not cure on its own. Creates cells and lacing in resin art Safe & user-friendly Odourless Non-toxic & non-flammable Zero-VOC formula with no harsh chemical ingredients, solvents or alcohol-based ink. Magic Drops can be used along with our range of colours or metallic pigments. Please Note that Magic Drops was developed and tested with our proprietary artwork resins.

$8,49

"Magic Drops" - Small Cells Effect Additive for Resin Art, 0.5oz (15ml)

Magic Drops SMALL to create cells, lacing & blooming effects for Abstract Resin Art 15 ml [0,5 oz]   Magic Drops is a one-component polymeric liquid that reacts with wet epoxy resins by repelling itself away, thereby stimulating movement in concentric outward circles. It is not paint or resin and will not cure on its own. Creates cells and lacing in resin art Safe & user-friendly Odourless Non-toxic & non-flammable Zero-VOC formula with no harsh chemical ingredients, solvents or alcohol-based ink. Magic Drops can be used along with our range of colours or metallic pigments. Please Note that Magic Drops was developed and tested with our proprietary artwork resins.

$8,49

Maintaining the Gloss of Painted Iron

To ensure the glossy appearance of painted iron is preserved, it is essential to adhere to some straightforward maintenance practices. Here are some helpful tips:

• Regularly clean the surface with a soft, dry cloth to eliminate dust and dirt.
• Use a mild detergent mixed with warm water to tackle stains and stubborn residues effectively.
• Avoid abrasive or harsh products that may cause damage to the paint.
• Thoroughly dry the surface post-cleaning to prevent streaks from forming.
• Optionally, consider applying a specific sealer or protective coating to sustain the gloss and safeguard the paint in the long run.

By following these guidelines, you can maintain the shiny finish of painted iron for an extended period.

Preserving the Shine of Painted Iron

To uphold the shine of painted iron, it is recommended to implement specific care practices. Here are some valuable tips:

• Routinely clean the surface with a soft, dry cloth to eliminate dust and dirt.
• Utilize a mild detergent diluted in warm water to cleanse stubborn stains, avoiding harsh products that could harm the paint.
• Refrain from using abrasive tools that might scratch the paint.
• Periodically apply a layer of wax to shield and conserve the surface's shine.
• Be vigilant about any scratches or dents, intervening promptly to prevent further damage.

By adhering to these simple guidelines, you can sustain the shine of painted iron for an extended duration.

Epoxy Resin Cleaning Tips

Ensuring the cleanliness of epoxy resin is crucial to uphold its beauty and durability over time. Here are some practical tips:

• Use a gentle, non-abrasive detergent to eliminate surface dirt.
• For stubborn stains, consider scrubbing with warm water and mild soap.
• Avoid using harsh solvents that may harm the resin.
• For glossy surfaces, employ a soft cloth to prevent scratches.
• If the resin appears dull, consider polishing it with a specialized epoxy resin polish.
• Remember to thoroughly dry the surface after cleaning to prevent streaks.

By following these straightforward guidelines, you can effectively maintain the cleanliness and longevity of your epoxy resin.

Silicone Mold Techniques for DIY Projects

Mastering silicone mold techniques is essential for creating high-quality and durable molds. Here are the steps to craft flawless molds:

• 1. Preparation: Ensure the model surface is clean and free of dust or dirt.
• 2. Mixing: Thoroughly blend the silicone resin per the manufacturer's instructions to avoid air bubbles.
• 3. Application: Pour the resin onto the model slowly and evenly to prevent buildup or voids.
• 4. Curing: Allow the silicone to dry for the required duration, adhering to the recommended curing times.
• 5. Removal: Once hardened, delicately remove the mold, ensuring neither the model nor the silicone is damaged.

By following these techniques, you can produce top-notch silicone molds for your DIY endeavors.

Transparent Resin Pigments for Artistic Effects

Transparent resin pigments serve as colorants for dyeing transparent resins like epoxy or polyurethane resins. These pigments are formulated to preserve the resin's transparency, enabling you to add color without compromising clarity. Available in a diverse array of colors, transparent resin pigments can be utilized to create artistic, decorative, or functional effects. Prior to use, carefully follow the manufacturer's instructions for proper mixing and application to achieve optimal results.

"Resi-Blast" - Cell Effect Resin Additive, 0.85oz

RESI-Blast 25 ml [0,85 oz] to create cell effects and decoration. One-component liquid to be added in drops over the resin when still liquid and coloured in layers to get an incredible effect! RESI-Blast is non-toxic and solvent-free. The product creates a surface dispersion of the resin, resulting in beautiful automatically generated cell structures (check the pictures!) This liquid reacts with epoxy resin, polyester and polyurethane (still liquid), and polymer resins stimulating movement and "blooming " in concentric outward circles. Add RESI-blast directly into the pigmented resin before pouring it over the surface or let it drip off over the surface immediately after the layering the pigmented resin. Innovative materials in the service of your imagination! Resin, Rubbers, Pigments, FIMO and much more in your home with a simple click!

$29,49

"3D-Finish" - Fast Coating Resin for 3D Prints

3D – FINISH “Fast” Post-print coating for polishing and finishing 3D prints. Applied on any kind print, it makes the treated surface glossy, smooth and impact-resistant. Specifically developed to be used in 3D applications, it does not drip or cover small details, faithfully respecting all the shapes of the printing. Eliminates unevenness between the different layers; Glossy; Strengthens the mechanical resistance of the printing; Can be polished and painted. If you want to paint your printing according to your tastes, 3D Finish “Fast” can be coloured with colouring pastes and metal powders. Excellent adhesion and reinforcement on PLA, LAYWOOD, ABS. Fast and effective, it is an easy-to-apply solution to create finished items through 3D printing more quickly, improving their aesthetic uniformity and their impact strength. Thanks to its high mechanical resistance, it is also perfect to be used as a bonding agent between printings or to repair damaged 3D artefacts. We recommend to store the product in a dark, cool and dry place away from direct sunlight. The tools must be washed with IPA (isopropyl alcohol).  

$16,49

"Silicone Oil" - Mould Protection Additive, 15ml

ResinPro silicone oil is composed of the highest quality elements and guarantees exceptional durability for your moulds! It is a product designed for artists who love to reproduce resin objects with silicone moulds and who want to protect their precious moulds from wear and tear. In fact, silicone moulds can often become damaged after a few uses: the silicone oil, regularly applied on the surfaces of silicone moulds, allows you to maintain the softness and anti-adhesive capacity of the moulds, resulting in them being unchanged and prolonged over time. Silicone oil also has many artistic applications: adding a few drops to a mass of coloured resin enable you to obtain special effects at the time of casting! In addition, silicone oil can also be used in pouring or fluid painting techniques with acrylic dyes to obtain the beautiful wet effect on your canvases ! ResinPro silicone oil is composed of the highest quality elements and guarantees exceptional durability for your moulds! It is a product designed for artists who love to reproduce resin objects with silicone moulds and who want to protect their precious moulds from wear and tear. In fact, silicone moulds can often become damaged after a few uses: the silicone oil, regularly applied on the surfaces of silicone moulds, allows you to maintain the softness and anti-adhesive capacity of the moulds, resulting in them being unchanged and prolonged over time. Silicone oil also has many artistic applications: adding a few drops to a mass of coloured resin enable you to obtain special effects at the time of casting! In addition, silicone oil can also be used in pouring or fluid painting techniques with acrylic dyes to obtain the beautiful wet effect on your canvases !

$7,49

"Edding" – Lacquer Marker for Resin Art, Fluid Art, and Geode Projects

Lacquer marker “Edding ” Multifunctional lacquer marker in 4 colors The legendary Japanese marker for decorating resin works in the style of Resin Art and Fluid Art, as well as for covering the ends of cup holders, geodes and other creations 🙂 It is convenient and multifunctional to use! The following colors are available to choose from: White Black Silver Gold Specifications: Lacquer marker “Edding 750” Ink base: nitrocolor Letter line thickness, mm: 2-4 Tip shape: round Body Material: Aluminum Country of manufacture: Japan Lacquer marker “Edding 751” Ink base: nitrocolor Letter line thickness, mm: 1-2 Tip shape: round Body Material: Aluminum Country of manufacture: Japan.

$9,95