Iron marine parts spray

"Marine Palette" - Resin Stain Kit with 3 Marine Shades and Sea Foam Powder

Set of dyes in a marine palette for works on marine and oceanic themes Ingredients: 3 dyes RESIN COLOUR TRANSLUCENT EFFECT 25 ML, Wave-pro powder for creating waves 15 ml, instructions for working with powder for waves. The kit is designed to create works of epoxy resin on a marine theme: take an artboard or a decorative board / saw cut and epoxy resin for painting to the set - and you can safely start creating a marine masterpiece 🙂 The kit is enough for many fillings, since a couple of drops of dye are enough to stain the resin.

$16,95

"G-Clamp" – 75mm Cast Iron Frame Woodworking Clamp

Robust cast-iron frame with steel threaded bar. Tommy bar handle for easy tightening. Swivel shoe allows for clamping irregular-shaped objects. Copper-plated thread prevents weld spatter from sticking. Reinforced shoulders provide greater strength. Corrosion-resistant frame finish.

$5,50

"Macota KZ 100" - Gloss Spray Lacquer, 400ml

“1K NEXTCOLOR K300” top coat is the best product on the market within the category of one-component top coats, which are also known as 1K. Due to its unique physicochemical properties, “MACOTA K300” is particularly suitable as a polished finish for resins and wood. “MACOTA K300” stands out for its glossiness, its resistance to scratches and to almost all detergents (even the most aggressive), its non-yellowing and its UV resistance. Recommended for resins that do not contain phosphorescent pigment, wood and various types of surfaces. Its unique properties fulfil the requirements for the protection, the sanding and the polishing of resins that do not contain phosphorescent pigment, wood and various types of surfaces. Properties: Scratch-resistant protective finish; Prevents the yellowing of the resin UV-resistant Easy to apply; Reusable multiple times How to apply: The surface needs some rest two-three days before applying the lacquer, to avoid getting a wrinkled surface. Shake the can well before use so that the agitator ball can be heard rattling. Spray in smooth strokes from 15-30cm away. Coat the surface with a thin and even layer. Repeat the process 2-3 times for the maximum protection, allowing 15 minutes drying time between each coat. Storage - To prevent blockages, invert the can after use and spray for 2 seconds. This aerosol should be stored out of direct sunlight, in a cool well ventilated place. Consult the safety data sheet before use. The coverage is about 1-1.5 square meters. Warning: at first it develops a strong smell, which disappears once dried. Work in a ventilated area. How to apply:  During processing, use protective masks, gloves, and other protective clothing. In case of contact with eyes, immediately rinse with cold water for 15 minutes and immediately consult a doctor.

$14,08

"Icrystal" - Clear Epoxy Resin, Two-Part, Water Clear Casting & Coating

Iron marine parts spray products are specially formulated to safeguard and coat metal surfaces that are exposed to harsh marine conditions. These sprays typically contain high-quality epoxy resins or silicones, providing exceptional resistance against corrosion and oxidation. They are user-friendly and ensure even coverage, even in challenging-to-reach areas. Ideal for marine applications, these sprays effectively protect metal components of boats such as hulls, bars, or deck equipment. To ensure lasting protection, it is crucial to meticulously adhere to the application instructions and opt for a premium product.

Cold Galvanizing Spray

Cold galvanizing spray is a reliable solution for shielding metals from corrosion. This spray consists of zinc particles that, when applied to metal surfaces, form a protective layer that inhibits oxidation. Particularly beneficial for repairing minor damaged spots or coating welds and cuts on steel, iron, or other metals, cold galvanizing spray is simple to apply and offers efficient defense against moisture and oxidation. It serves as a convenient and budget-friendly option for DIY projects and minor maintenance tasks.

Marine Iron Primer

The marine iron primer is a specialized product crafted to safeguard and prime iron surfaces on boats before the application of epoxy resins and protective coatings. This primer firmly adheres to the metal, establishing a corrosion-resistant foundation and enhancing the bonding of subsequent coating layers. Due to its unique formulation, the marine iron primer provides effective defense against moisture, oxidation, and wear, thereby prolonging the longevity of the final coating. Prior to applying any paint or coating on boat iron surfaces, using a dedicated primer is essential to ensure optimal long-term protection.

Antifouling Paint for Boat Hulls

Antifouling paint for boat hulls is a protective coating designed to shield boat hulls from the accumulation of marine organisms like algae, mollusks, and crustaceans. These organisms can compromise a boat's performance and escalate fuel consumption. Infused with chemicals that deter marine organisms from adhering to the hull, antifouling paint eases the cleaning and upkeep of the boat. Correct application and adherence to the manufacturer's guidelines are crucial to ensure the paint's long-term efficacy. The selection of antifouling paint hinges on the hull material and sailing conditions.

Rust Inhibitors for Marine Iron Parts

Rust inhibitors for marine iron parts are specialized products engineered to safeguard metal surfaces exposed to the marine environment. Formulated with epoxy or silicone resins, these anti-corrosion treatments are tailored to withstand the corrosive effects of saltwater and moisture. When applied correctly, rust inhibitors form a robust protective layer that hinders rust formation on iron parts, thereby extending their lifespan and preserving their aesthetic appeal. It is imperative to diligently follow the manufacturer's instructions for effective and long-lasting application, especially in demanding marine settings.

"2K Clear Coat Laquer" - Aerosol Spray 13.5oz Fast Drying High Gloss

Key Features Fast Drying: Reduces waiting time between layers and project completion. High Gloss: Provides a professional and polished look to your epoxy resin creations. Easy Application: The aerosol format ensures even application without the need for additional equipment. Application Instructions Surface Preparation: Ensure the surface is clean, dry, and free of dust and grease. Application: Shake the can thoroughly before use. Spray the lacquer evenly from a distance of 20-30 cm. Layering: For best results, apply 2-3 thin layers, allowing 10-15 minutes between each layer. Drying Time: Allow the coating to fully cure for 24 hours for maximum durability and shine. Perfect for resin artists and DIY enthusiasts seeking professional-quality finishes.

$28,49

"Liquid Mold" - Casting Liquid Silicone Rubber, 15/20 Shore A, 2-Part for Mold-Making

CASTING LIQUID SILICONE RUBBER – for mold-making. Two-component A + B. Liquid silicone rubber for mold-making; able to penetrate everywhere and to reproduce every small detail. It is suitable for making molds for small objects, even with very fine details and noticeable undercuts. Liquid Silicone Rubber for Making Highly Detailed Molds. Compatible with Resin, Soap and Polymer Pastes. Ideal for multiple reproductions of models and complex shapes and jewelry of any kind. White Color – Mixing Ratio: 100: 2 by weight (for 20 Shore type), 100:3 by weight (for 15 Shore type). Complete cure in 12 hours. Liquid medium-hard condensation pourable silicone rubber. It possesses high mechanical characteristics, and it is suited for the preparation of molds with fine details: reproduction of bronze statues (artistic foundries), serial reproduction of complex objects in resin (polyester, polyurethane and epoxy), in plaster, natural and synthetic wax, concrete (e.g., statues, decorative garden items, decorative candles, prototypes, decorative ceramics, rosettes, frames, faux wood decorations, etc.). Castings for technical products. Technical Features: + Mix ratio: 100: 2 by weight (for 20 Shore type), 100:3 by weight (for 15 Shore type), + Pot Life – 60-80 min; + Pouring time – 60-80 min; + Demold time – 12 hours; + Hardness – 20 + -3 Shore A + Color – white, semi-gloss.

"Sand" - Natural Sand for Ocean Art and Epoxy Resin Decoration

Natural sand for decorating artwork made of epoxy resin. Sand is perfect for decorating your paintings and panels made of epoxy resin: add a little marine exoticism to your works!

$3,08

GlobalWax Liquid Release Agent for Epoxy, Polyurethane & Acrylic Resins – 1000ml

GlobalWax Release Agent (liquid) for Epoxy, Polyurethane and Acrylic Resins. GLOBALWAX 200 L Liquid is a wax-based product to be used with a brush or a spray gun Resistant up to + 180°C [356 F]. Description: GlobalWax release agent (liquid) creates a wax film on the mould surfaces and on the models, with strong anti-adhesion characteristics and high temperature resistance (up to + 180°C [356 F]). It is particularly recommended for the preparation of moulds and formworks for the pouring of resins. You can apply it on wood, metal, plastic or even cardboard, and in a few minutes you will have a perfectly anti-adherent surface to pour the resin or other compounds. Application - Brush or spray gun. Colour: - white. Package: 1000 ml [35,19 oz] Liquid wax release agent packed in 1 litre [35,19 oz] packs. Very effective release agent that can be applied by brush or spray gun. It dries quickly in 2-3 minutes and retains all the details of the mould. WARNING: HIGHLY FLAMMABLE

$16,49