SILICONE MOULD FOR HANDCRAFTS. Easy to use, highly polished and perfect for creating beautiful jewellery or decorations. Suitable to be used with soap, plaster, resin, ice, ceramic, clay, wax and other casting materials proper for DIY. Moulds for objects, jewels and chocolate. DO-IT-YOURSELF. Material: Silicone, Colour: Semi-transparent; Reusable, Non-stick, Easy to use and clean. Measures of each mould: 5 CM [1,96"] / 3.5 CM [1,37"] Warning: do not use aggressive solvents, High-quality moulds, heat- resistant: -40°C to + 210°C [-104° F to +410° F]
$5,95
36 Wt. UV lamp for UV resin/gel Perfect for curing UV resin and speeding up the cure time. Provides a glossy and dry surface within seconds. Thanks to its internal refraction system, it irradiates from ALL DIRECTIONS, hardening the resin in a short time. You can just leave the mould inside the box, with no need to keep holding the UV lamp in your hand. Save your time! Cures UV resin / gel nail polish; Lifetime of 50.000 hours, professional and DIY use; 36 Wt. UV lamp reduces the cure time of the UV resin/gel by 50 % compared with standard devices. Equipped with 36 LED bulbs; Automatic sensors and pre-set timers. The UV lamp is provided with automatic sensors that enable the lamp to start functioning upon insertion of the item. The sensors automatically stop the device if you pull out your creation; The lamp works with all kinds of LED and UV gels, including restorative gels and Nail Art; Nominal input: 100-240V 50/Hz 1A; Nominal output DC 12V 1.5A; Sizes: 12 cm x 19 cm x 7.5 cm [4,72” x 7,48” x 2,95”]. USB powered (plug not included)
$18,95
SILICONE MOULD FOR HANDCRAFTS. Easy to use, highly polished and perfect for creating beautiful jewellery or decorations. Suitable to be used with soap, plaster, resin, ice, ceramic, clay, wax and other casting materials proper for DIY. Moulds for objects, jewels and chocolate. DO-IT-YOURSELF. Material: Silicone, Colour: Semi-transparent; Reusable, Non-stick, Easy to use and clean. Measures of each mould: D 10 CM [3,93"] / H.2.8 CM [1,10"] Warning: do not use aggressive solvents, High-quality moulds, heat- resistant: -40°C to + 210°C [-104° F to +410° F]
$21,95
Natu🍀Resin is a two-component acrylic polymer / water-based mineral resin system.(SUPPLIED ONLY PART A - ACRYL POLYMER, THE PART B (water) YOU CAN USE FROM THE TAP) This material has many names: acrylic plaster / sculptural plaster / acrylic composite/ acrylic resin/ eco-resin. 100% non-toxic white powder material that is mixed with water to create castings in silicone or polyurethane moulds. Does not cause irritation when in contact with the skin, and it is not flammable. After complete curing, the products are similar in appearance to ceramics, and do not require additional processing. Great for creating coasters, figurines, vases and other creative products. *The product has a glossy surface only on those sides that touched the mould (the mould must also be glossy)
$22,95
How to Customize a Resin Box
Customizing a resin box is a fun and creative process that allows you to create a unique piece that reflects your personal style. Before you begin, make sure you have a high-quality resin box. Follow these steps to customize your resin box:
- 1. Choose the Design: Decide on the design you want for your box. You can paint it, add glitter, stickers, or insert decorative items.
- 2. Prepare the Resin: Thoroughly mix the resin and catalyst according to the manufacturer's instructions.
- 3. Apply the Resin: Pour the resin onto the box in an even layer, ensuring all surfaces are well covered.
- 4. Personalize: Add your personal touch with colors, decorations, or special items.
- 5. Let it Dry: Allow the box to dry completely following the resin's curing times.
- 6. Protect Your Work: Once dry, seal the box with a transparent coating to protect your customization.
By following these steps, you can create a one-of-a-kind resin box tailored to your preferences.
Customized Resin Box
A customized resin box is a unique item made using epoxy or polyurethane resin, personalized to the customer's preferences. These boxes come in various shapes, sizes, and colors, often featuring inclusions like dried flowers, glitter, or other decorative objects. The resin provides a shiny, transparent look while safeguarding the items inside. This type of product is highly popular in the DIY and crafting sector, valued for its versatility in crafting personalized pieces.
Creating a Transparent Resin Box
To create a transparent resin box, follow these steps carefully. First, gather epoxy transparent resin, silicone mold (optional), colors, and decorative materials. Pour the resin into the mold, ensuring no air bubbles form. Add colors or decorative inclusions as desired. Let it cure following the manufacturer's instructions. Once solidified, remove the box from the mold, check for defects, and polish the surface as needed. Work in a well-ventilated area and wear protective gear during the process.
Ideas to Decorate Resin Boxes
Decorating a resin box is a creative and enjoyable activity. Here are some ideas to personalize your resin box:
Pour a thin layer of transparent resin on the box and add dried flowers, leaves, or glitter for an elegant and natural effect.
Use pigmented colors to dye the resin and create unique designs like marble, ombre, or gradients.
Incorporate small objects like buttons, beads, or shells into the resin for a personalized touch.
Apply stencils on the box and fill them with colored resin to create geometric or floral patterns.
Experiment with fluorescent or phosphorescent colored resins for a glow-in-the-dark effect. Try different techniques and materials to craft a unique and personalized resin box.
DIY Resin Box Tutorial
Creating a DIY resin box is a rewarding and creative project. Here's a step-by-step guide:
Prepare the desired box model.
Pour equal parts of resin and hardener into a container.
Mix thoroughly for at least 2-3 minutes.
Add colors or pigments for a colored box.
Pour the resin into the model, avoiding air bubbles.
Let it cure for the necessary time as per the manufacturer's instructions.
Once hardened, carefully remove the box from the model.
By following these steps, you can craft a unique and personalized resin box using DIY techniques.
SILICONE MOULD FOR HANDCRAFTS. Easy to use, highly polished and perfect for creating beautiful jewellery or decorations. Suitable to be used with soap, plaster, resin, ice, ceramic, clay, wax and other casting materials proper for DIY. Moulds for objects, jewels and chocolate. DO-IT-YOURSELF. Material: Silicone, Colour: Semi-transparent; Reusable, Non-stick, Easy to use and clean. Measures of each mould: D 12.5 CM [4,92"] / H.3.6 CM [1,41"] Warning: do not use aggressive solvents, High-quality moulds, heat- resistant: -40°C to + 210°C [-104° F to +410° F] Attention! Remove the product from the mold no later than 12 hours after pouring the resin. Otherwise, there is a chance of local adhesion of the resin to the mold.
$15,51
SILICONE MOULD FOR HANDCRAFTS. Easy to use, highly polished and perfect for creating beautiful jewellery or decorations. Suitable to be used with soap, plaster, resin, ice, ceramic, clay, wax and other casting materials proper for DIY. Moulds for objects, jewels and chocolate. DO-IT-YOURSELF. Material: Silicone, Colour: Semi-transparent; Reusable, Non-stick, Easy to use and clean. Measures of each mould: 13 x 11 x 3 CM [5,11" x 4,33" x 1,18"] Warning: do not use aggressive solvents, High-quality moulds, heat- resistant: -40°C to + 210°C [-104° F to +410° F]
$7,95
Kintsugi Repair Kit - Repair and Transform Your Ceramics with Elegance Celebrate imperfection with the ancient Japanese art Discover the traditional Japanese art of Kintsugi with our complete repair kit. Transform your broken ceramics into unique and fascinating works of art, highlighting imperfections with elegant gold, silver, or copper veins. Our kit is perfect for both beginners and experts, offering detailed instructions and everything you need to give new life and value to your most cherished items. 🌟 Specific epoxy resin (150g): slow catalysis to eliminate any bubbles or imperfections, allowing you to complete the work without rushing. 🎨 Dye of your choice (gold, copper, silver): customize your repair with a touch of elegance and refinement. ✨ Respect the tradition: follow the ancient art of Kintsugi and transform your ceramics into unique and precious treasures. The kit contains: 150g of resin for 3D decorations, 2 pairs of protective gloves, 2 mixing cups, and 5 spatulas for applying the resin, detailed instructions, everything you need in one kit. Give your ceramics a unique touch: repair them with style and make them even more beautiful. Buy the Kintsugi Repair Kit now and start creating your works of art today! Kintsugi Kit Instructions: Mix Resin: Measure 100A:50B by volume (or 100A:45B by weight) using a scale. Mix for 2 minutes, ensuring all surfaces are scraped. Add Colour: Mix your chosen metallic dye (gold, silver, or copper) into the resin to highlight the cracks. Prepare Surface: Ensure surfaces are clean, dry, and sanded. Apply Resin: Fill the cracks with the colored resin. Curing: Work in a temperature-controlled area, avoiding humidity. Safety: Wear protective gear.
$22,95
Multi-Function Rotary Tool Description: Versatile rotary tool designed for precise cutting, grinding, polishing, and carving. Features variable speed control (8,000-33,000 RPM) for optimal performance and a spindle lock for easy accessory changes. Includes two collets for mandrel sizes of 3/32" (2.4mm) and 1/8" (3.2mm). Comes with a convenient suspension loop and a comprehensive 43-piece accessory kit. Perfect for DIY enthusiasts and detailed craftwork. Key Features: Adjustable Speed & Spindle Lock: Allows you to tackle various projects with ease and switch accessories quickly. Comprehensive Accessories Kit: Includes sanding drums/discs, grinding stones, diamond bits, polishing wheels, and more. Precision Collets: Compatible with 3/32" (2.4mm) and 1/8" (3.2mm) mandrels. No-Load Speed Range: 8,000-33,000 RPM. Cable Length: 5.7 feet (1.75 meters). Compact & Portable: Comes with a durable blow-molded case for easy storage and transport. What’s in the Box: 1 x 135W Multi-Function Rotary Tool 1 x Drill Bit 3mm (Approx. 1/8") 1 x Drill Bit 2mm (Approx. 5/64") 1 x Ball Diamond Bit 1 x Coned Diamond Bit 1 x Disc Mandrel 1 x Felt Mandrel 1 x Steel Brush 1 x Nylon Brush 10 x Grinding Stones (Various Tips) 3 x Sanding Discs 8 x Cutting Discs 2 x Polishing Wheels (1" and 0.5") 1 x Drum Mandrel 4 x Sanding Drums 2 x Collets (3/32" and 1/8") 1 x Spanner 1 x Blow-Molded Case 1 x Instruction Manual Technical Specifications: Cable Length: 5.7 feet Power: 135W No-Load Speed: 8,000-33,000 RPM
$48,95
Free shipping on orders over €199,00 
Shipping Tracking! 
Google
Facebook
