Can microcement be applied on sloping surfaces?

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

$33,85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

$16,85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

$11,65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

$19,85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

$13,45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

$22,85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

$22,45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

$17,85

Can Microcement be Applied on Sloped Surfaces

Microcement can be successfully applied on sloped surfaces with proper precautions and techniques. This versatile decorative coating, consisting of a blend of cement resins and additives, is durable and suitable for various applications. Here are some essential points to consider:

• Surface Preparation: Before application, ensure the surface is clean, smooth, dry, and free from dust, grease, or impurities. Applying a primer may be necessary to enhance microcement adhesion.
• Base Layer: On sloped surfaces, it is recommended to use a suitable primer and apply an even base layer for a seamless finish. This step helps improve microcement adhesion.
• Microcement Application: Following the manufacturer's instructions, apply the microcement precisely and evenly, especially on non-horizontal surfaces.
• Finishing and Sealing: After drying, finish and seal the microcement to protect it from wear, stains, and moisture. Adhere to the manufacturer's guidelines and seek professional assistance if needed for a lasting application.

Can Microcement be Used on Curved Surfaces

Microcement is suitable for application on curved surfaces, but certain considerations are necessary for optimal results:

• Material Flexibility: Microcement's composition of resins and mineral powders provides flexibility, allowing it to adapt to curves without cracking or breaking.
• Surface Preparation: Ensure the curved surface is clean, smooth, and free of imperfections for proper adhesion of the microcement.
• Professional Application: Due to the complexity of applying microcement on curved surfaces, engaging an experienced professional is advisable to ensure correct application and avoid future issues.
• Sealing and Maintenance: Proper sealing is crucial for durability on curved surfaces. Follow the manufacturer's maintenance recommendations to preserve the coating's longevity.

How to Apply Microcement on Irregular Surfaces

To apply microcement on non-flat surfaces successfully, follow these steps for optimal results

Surface Preparation:

Thoroughly clean the surface, removing dust, dirt, and grease.

Repair any cracks or irregularities with suitable fillers.

Apply a specific microcement primer for optimal adhesion.

Microcement Application:

Spread a thin layer evenly using a stainless steel trowel.

Use a notched trowel for uniform application, even on irregular surfaces.

Apply multiple layers following drying intervals as per the manufacturer's instructions.

Finishing and Protection:

Sand the surface gently for a smooth finish.

Apply a sealant for durability and resistance.

Limitations of Microcement Application on Vertical or Inclined Surfaces

Applying microcement on vertical or inclined surfaces may present challenges such as adhesion, thickness, working time, profiles, angles, and drying considerations. Proper surface preparation and technique are crucial to achieve a quality and enduring result.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

$13,45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

$22,85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

$22,45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

$17,85